SNAS483F February   2010  – August 2015 ADC128D818

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Description (continued)
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 DC Electrical Characteristics
    6. 7.6 AC Electrical Characteristics
    7. 7.7 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Supply Voltage (V+)
      2. 8.3.2 Voltage References (VREF)
      3. 8.3.3 Analog Inputs (IN0 - IN7)
        1. 8.3.3.1 Single-Ended Input
        2. 8.3.3.2 Pseudo-Differential Input
    4. 8.4 Device Functional Modes
      1. 8.4.1 Modes of Operation
    5. 8.5 Programming
      1. 8.5.1 Interface
        1. 8.5.1.1 Serial Bus Address
        2. 8.5.1.2 Time-out
          1. 8.5.1.2.1 Example Writes and Reads
    6. 8.6 Register Maps
      1. 8.6.1  ADC128D818 Internal Registers
      2. 8.6.2  Configuration Register — Address 00h
      3. 8.6.3  Interrupt Status Register — Address 01h
      4. 8.6.4  Interrupt Mask Register — Address 03h
      5. 8.6.5  Conversion Rate Register — Address 07h
      6. 8.6.6  Channel Disable Register — Address 08h
      7. 8.6.7  One-Shot Register — Address 09h
      8. 8.6.8  Deep Shutdown Register — Address 0Ah
      9. 8.6.9  Advanced Configuration Register — Address 0Bh
      10. 8.6.10 Busy Status Register — Address 0Ch
      11. 8.6.11 Channel Readings Registers — Addresses 20h - 27h
      12. 8.6.12 Limit Registers — Addresses 2Ah - 39h
      13. 8.6.13 Manufacturer ID Register — Address 3Eh
      14. 8.6.14 Revision ID Register — Addresses 3Fh
  9. 9 Application and Implementation
    1. 9.1 Application Information
      1. 9.1.1 Digital Output (DOUT)
      2. 9.1.2 Temperature Measurement System
        1. 9.1.2.1 Temperature Limits
      3. 9.1.3 Interrupt Structure
        1. 9.1.3.1 Interrupt Output (INT)
        2. 9.1.3.2 Interrupt Clearing
        3. 9.1.3.3 Temperature Interrupt
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Power Management
        2. 9.2.2.2 Using the ADC128D818
          1. 9.2.2.2.1 Quick Start
          2. 9.2.2.2.2 Poweron Reset (POR)
          3. 9.2.2.2.3 Configuration Register (address 00h)
          4. 9.2.2.2.4 Interrupt Status Register (address 01h)
          5. 9.2.2.2.5 Interrupt Mask Register (address 03h)
          6. 9.2.2.2.6 Conversion Rate Register (address 07h)
          7. 9.2.2.2.7 One-Shot Register (address 09h)
          8. 9.2.2.2.8 Deep Shutdown Register (address 0Ah)
          9. 9.2.2.2.9 Channel Readings Registers (addresses 20h - 27h)
      3. 9.2.3 Application Curve
    3. 9.3 System Examples
      1. 9.3.1 General Voltage Monitoring
      2. 9.3.2 Voltage Monitoring for Power Supplies
      3. 9.3.3 Temperature Sensors
      4. 9.3.4 Bridge Sensors
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 Community Resources
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

10 Power Supply Recommendations

The ADC128D818 operates with a supply voltage, V+, that has a range between 3 V to 5.5 V. Take care to bypass this pin with a parallel combination of 1-µF (electrolytic or tantalum) capacitor and 0.1-µF (ceramic) bypass capacitor.

The reference voltage (VREF) sets the analog input range. The ADC128D818 has two options for setting VREF. The first option is to use the internal VREF, which is equal to 2.56 V. The second option is to source VREF externally through pin 1 of ADC128D818. In this case, the external VREF will operate in the range of 1.25 V to V+. The default VREF selection is the internal VREF. If the external VREF is preferred, use the Advanced Configuration Register — Address 0Bh to change this setting.

VREF source must have a low output impedance and needs to be bypassed with a minimum capacitor value of 0.1 µF. A larger capacitor value of 1 µF placed in parallel with the 0.1 µF is preferred. VREF of the ADC128D818, like all ADC converters, does not reject noise or voltage variations. Keep this in mind if VREF is derived from the power supply. Any noise and/or ripple from the supply that is not rejected by the external reference circuitry will appear in the digital results. The use of a reference source is recommended. The LM4040 (SLOS746) and LM4050 (SNOS455) shunt reference families as well as the LM4120 (SNVS049) and LM4140 (SNVS053) series reference families are excellent choices for a reference source.
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |