ZHCSEA4C May 2015 – December 2020 ADS54J40
PRODUCTION DATA
The JESD204B standard defines the following parameters:
Table 8-10 lists the available JESD204B formats and valid ranges for the ADS54J40 when the decimation filter is not used. The ranges are limited by the SERDES lane rate and the maximum ADC sample frequency.
16-bit data going to JESD 8b/10b encoder is formed by padding two 0s as LSBs into the 14-bit ADC data.
L | M | F | S | DECIMATION | MINIMUM RATES | MAXIMUM RATES | ||
---|---|---|---|---|---|---|---|---|
SAMPLING RATE (MSPS) | SERDES BIT RATE (Gbps) | SAMPLING RATE (MSPS) | SERDES BIT RATE (Gbps) | |||||
4 | 2 | 1 | 1 | Not used | 250 | 2.5 | 1000 | 10.0 |
4 | 2 | 4 | 4 | Not used | 250 | 2.5 | 1000 | 10.0 |
8 | 2 | 2 | 4 | Not used | 500 | 2.5 | 1000 | 5.0 |
In the LMFS = 8224 row of Table 8-10, the sample order in lane DA2 and DA3 are swapped.
The detailed frame assembly is shown in Table 8-11.
PIN | LMFS = 4211 | LMFS = 4244 | LMFS = 8224 | ||||
---|---|---|---|---|---|---|---|
DA0 | A3[15:8] | A3[7:0] | |||||
DA1 | A0[7:0] | A2[15:8] | A2[7:0] | A3[15:8] | A3[7:0] | A2[15:8] | A2[7:0] |
DA2 | A0[15:8] | A0[15:8] | A0[7:0] | A1[15:8] | A1[7:0] | A0[15:8] | A0[7:0] |
DA3 | A1[15:8] | A1[7:0] | |||||
DB0 | B3[15:8] | B3[7:0] | |||||
DB1 | B0[7:0] | B2[15:8] | B2[7:0] | B3[15:8] | B3[7:0] | B2[15:8] | B2[7:0] |
DB2 | B0[15:8] | B0[15:8] | B0[7:0] | B1[15:8] | B1[7:0] | B0[15:8] | B0[7:0] |
DB3 | B1[15:8] | B1[7:0] |