Typical values at T_A = +25°C with nominal supplies. Unless otherwise noted, TX input data rate = 750MSPS, f_DAC = 9000MSPS, non-interleave mode, A_OUT = –1 dBFS, 2^nd Nyquist zone output, External clock mode, 12x Interpolation, DSA = 0 dB, Sin(x)/x enabled, DSA calibrated, TX Clock Dither Enabled, 7.1GHz matching.

Excluding PCB and cable losses

Figure 5-522 TX Full Scale vs RF Frequency and Channel

Excluding PCB and cable losses

Figure 5-524 TX Full Scale vs DSA Setting and Channel at 7.1 GHz

Differential Gain Error = Gain(DSA Setting – 1) – Gain(DSA Setting)

Figure 5-526 Uncalibrated Differential Gain Error vs Temperature at 7.1 GHz

Differential Gain Error = Gain(DSA Setting – 1) – Gain(DSA Setting)

Figure 5-528 Calibrated Differential Gain Error vs Temperature at 7.1 GHz

Integrated Gain Error = Gain(DSA Setting) – Gain(DSA Setting = 0).

Figure 5-530 Uncalibrated Integrated Gain Error vs Temperature at 7.1 GHz

Integrated Gain Error = Gain(DSA Setting) – Gain(DSA Setting = 0).

Figure 5-532 Calibrated Integrated Gain Error vs Temperature at 7.1 GHz

Differential Phase Error = Phase(DSA Setting – 1) – Phase(DSA Setting)

Figure 5-534 Uncalibrated Differential Phase Error vs Temperature at 7.1 GHz

Differential Phase Error = Phase(DSA Setting – 1) – Phase(DSA Setting)

Figure 5-536 Calibrated Differential Phase Error vs Temperature at 7.1 GHz

Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0)

Figure 5-538 Uncalibrated Integrated Phase Error vs Temperature at 7.1 GHz

Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0)

Figure 5-540 Calibrated Integrated Phase Error vs Temperature at 7.1 GHz

Tone spacing = 50MHz

Figure 5-542 IMD3 vs Digital Amplitude and Temperature at 7.1 GHz

Tone spacing = 50MHz

Figure 5-544 IMD3 vs DSA Setting and Digital Amplitude at 7.1 GHz

Figure 5-546 IMD3 vs Tone Spacing and Channel at 7.1 GHz

Figure 5-548 IMD3 vs Tone Spacing and Temperature at 7.1 GHz

50MHz offset from tone

Figure 5-550 NSD vs DSA Setting and Amplitude at 7.1 GHz

50MHz offset from tone

Figure 5-552 NSD vs Digital Amplitude and Channel at 7.1 GHz

Inband = 7100MHz ± 600MHz, excluding IMD3 components, 3*FS/4 spur not included and shown separately

Figure 5-554 Two Tone Inband SFDR vs Digital Amplitude at 7.1 GHz

Figure 5-556 Single Tone Output Spectrum at 7.1GHz, -1dBFS (Inband)

Figure 5-558 Single Tone Output Spectrum at 7.1GHz, -6dBFS (Inband)

Figure 5-560 Single Tone Output Spectrum at 7.1GHz, -12dBFS (Inband)

50MHz Tone Spacing

Figure 5-562 Two Tone Output Spectrum at 7.1GHz, -7dBFS each (Inband)

50MHz Tone Spacing

Figure 5-564 Two Tone Output Spectrum at 7.1GHz, -13dBFS each (Inband)

50MHz Tone Spacing

Figure 5-566 Two Tone Output Spectrum at 7.1GHz, -30dBFS each (Inband)

Excluding PCB and cable losses

Figure 5-523 TX Full Scale vs Temperature and Channel at 7.1GHz

Differential Gain Error = Gain(DSA Setting – 1) – Gain(DSA Setting)

Figure 5-525 Uncalibrated Differential Gain Error vs Channel at 7.1 GHz

Differential Gain Error = Gain(DSA Setting – 1) – Gain(DSA Setting)

Figure 5-527 Calibrated Differential Gain Error vs Channel at 7.1 GHz

Integrated Gain Error = Gain(DSA Setting) – Gain(DSA Setting = 0).

Figure 5-529 Uncalibrated Integrated Gain Error vs Channel at 7.1 GHz

Integrated Gain Error = Gain(DSA Setting) – Gain(DSA Setting = 0).

Figure 5-531 Calibrated Integrated Gain Error vs Channel at 7.1 GHz

Differential Phase Error = Phase(DSA Setting – 1) – Phase(DSA Setting)

Figure 5-533 Uncalibrated Differential Phase Error vs Channel at 7.1 GHz

Differential Phase Error = Phase(DSA Setting – 1) – Phase(DSA Setting)

Figure 5-535 Calibrated Differential Phase Error vs Channel at 7.1 GHz

Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0)

Figure 5-537 Uncalibrated Integrated Phase Error vs Channel at 7.1 GHz

Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0)

Figure 5-539 Calibrated Integrated Phase Error vs Channel at 7.1 GHz

Tone spacing = 50MHz

Figure 5-541 IMD3 vs Digital Amplitude and Channel at 7.1 GHz

Tone spacing = 50MHz

Figure 5-543 IMD3 vs DSA Setting and Channel at 7.1 GHz

Tone spacing = 50MHz

Figure 5-545 IMD3 vs DSA Setting and Temperature at 7.1 GHz

Figure 5-547 IMD3 vs Tone Spacing and Digital Amplitude at 7.1 GHz

Tone at -12dBFS, 50MHz offset from tone

Figure 5-549 NSD vs DSA Setting and Channel at 7.1 GHz

Tone at -12dBFS, 50MHz offset from tone

Figure 5-551 NSD vs DSA Setting and Temperature at 7.1 GHz

50MHz offset from tone

Figure 5-553 NSD vs Digital Amplitude and Temperature at 7.1 GHz

Figure 5-555 Single Tone Output Spectrum at 7.1GHz, -1dBFS (Nyquist)

Figure 5-557 Single Tone Output Spectrum at 7.1GHz, -6dBFS (Nyquist)

Figure 5-559 Single Tone Output Spectrum at 7.1GHz, -12dBFS (Nyquist)

50MHz Tone Spacing

Figure 5-561 Two Tone Output Spectrum at 7.1GHz, -7dBFS each (Nyquist)

50MHz Tone Spacing

Figure 5-563 Two Tone Output Spectrum at 7.1GHz, -13dBFS each (Nyquist)

50MHz Tone Spacing

Figure 5-565 Two Tone Output Spectrum at 7.1GHz, -30dBFS each (Nyquist)

Figure 5-567 External Clock Additive Phase Noise at 7.1 GHz