Revision History
Changes from April 2, 2021 to January 10, 2022 (from Revision C (April 2021) to Revision D (January 2022))
-
通篇:进行了更新,以反映功能安全合规性;在主/从术语方面改用了更具包容性的措辞Go
-
(特性):更新了功能安全合规性认证资料;添加了关于器件安全的详细信息;提及了毫米波传感器的额定工作温度范围Go
-
(器件信息):添加了功能安全合规型安全量产器件 AWR6843ABSABLRQ1 和 AWR6843ABSABLQ1Go
-
(Device Comparison) Changed/Updated to include AWR1843AOP;
Updated/Changed the AWR6843AOP Product status from "AI" to "PD" Go
-
(Device Comparison) Removed information on Functional-Safety
compliance from the table and instead added a table-note for this and LVDS
Interface; Additional information on Device security updated.Go
-
(Signal Descriptions): Updated/Changed CLKP and CLKM
descriptionsGo
-
(Absolute Maximum Ratings): Added entries for externally
supplied power on the RF inputs (TX and RX) and a table-note for the signal
level applied on TX.Go
-
(Clock Specifications): Updated/Changed Crystal Electrical
Characteristics (Oscillator Mode) to reflect correct device operating
temperature range.Go
-
(Table. External Clock Mode Specifications): Revised
frequency tolerance specs from +/-50 to +/-100 ppmGo
-
(QSPI Timings):Updated/Changed Setup Time from 7.3us to 5us
and Hold Time from 1.5us to 1us for QSPI TimingsGo
-
(QSPI Timings): Updated/Changed Delay time, sclk falling
edge to d[1] transition [Q6, Q9] from -3.5us to -2.5us (Min) and 7us to
4us (Max) in QSPI Switching CharacteristicsGo
-
(Transmit Subsystem): Updated/Changed figure.Go
-
(Monitoring and Diagnostic Mechanisms): Updated/Changed table
header and description to reflect Functional Safety-Compliance; added a note for
reference to safety related collateral Go
-
(Device Nomenclature) : Updated/modified figure to reflect
Functional Safety complianceGo
- Tray Information for ABL, 10.4 × 10.4 mm: Added tray information
for secure part.Go