4 修订历史记录

Changes from C Revision (April 2018) to D Revision

• Changed 在“ 特性 ”中将 TUE 从 ±0.14% 更改为 0.1%Go
• Changed 在“ 特性 ”中将“低温票”从 5ppm/°C 更改为 2ppm/°C 并且添加了 DAC80508Go
• Added 在 “特性”中增加了“清除输出函数：DACx0508C”Go
• Deleted 在 “特性”中删除了 4 线制模式Go
• Deleted 在 “说明”的第二段中删除了“4 线制” Go
• Deleted 从“器件信息”中删除了 DAC80508 米6体育平台手机版_好二三四预览脚注Go
• Deleted Product Preview from DAC80508Z and DAC80508M in Device Comparison TableGo
• Added DAC80508ZC and DAC80508MC to Device Comparison TableGo
• Added DAC60508ZC and DAC60508MC to Device Comparison TableGo
• Added DACx0508 to SDO/ALARM pin description in Pin FunctionsGo
• Added CLR pin (DACx0508C) in Pin FunctionsGo
• Changed SCLK, SDI, SDO/ALARM and CS to Digital pins for Pin voltage in Absolute Maximum RatingsGo
• Added Total unadjusted error, DAC80508. All Gains row in Electrical CharacteristicsGo
• Added Offset error, DAC80508. WQFN and BGA packages. All gains. row in Electrical CharacteristicsGo
• Added Full-scale error, DAC80508.All gains row in Electrical CharacteristicsGo
• Added Gain error, DAC80508 row in Electrical CharacteristicsGo
• Changed Short circuit current, DAC code = full scale. Output shorted to GND TYP from 35 mA to 30 mA in Electrical CharacteristicsGo
• Changed Short circuit current, DAC code = zero scale. Output shorted to V_DD TYP from 30 mA to 35 mA in Electrical CharacteristicsGo
• Added Channel to Channel DC crosstalk, DAC80508. Measured channel at midscale. Adjacent channel at full scale in Electrical CharacteristicsGo
• Added Channel to Channel DC crosstalk, DAC80508. Measured channel at midscale. All other channels at full scale in Electrical CharacteristicsGo
• Added Reference output drift, DAC80508 in Electrical CharacteristicsGo
• Added Reference thermal hysteresis, DAC80508. First cycle in Electrical CharacteristicsGo
• Added SDO/ALARM to DIGITAL OUTPUTS heading in Electrical CharacteristicsGo
• Deleted I_DD, Power-down max value in Electrical CharacteristicsGo
• Changed Figure 1 to Figure 18Go
• Changed Figure 20 to Figure 28Go
• Changed Figure 34Go
• Changed Figure 35Go
• Changed Figure 37Go
• Changed Figure 38Go
• Added Figure 43Go
• Added Figure 44Go
• Changed Figure 58Go
• Deleted 4-wire from paragraph in Overview sectionGo
• Added paragraph to Overview sectionGo
• Changed SDO/ALARM to SDO/ALARM or CLR in Functional Block DiagramGo
• Added CLEAR Operation (DACx0508C only) sectionGo
• Added Figure 61Go
• Deleted four-wire from Programming sectionGo
• Added CLR pulse in Table 7Go
• Added CLR delay and note in Table 7Go
• Changed table note for Table 8Go
• Added CLR-4TO7-MSK and CLR-0TO3-MSK bits for DACx0508C only to Figure 71Go
• Added table note to Figure 71Go
• Added CLR-4TO7-MSK and CLR-0TO3-MSK bits for DACx0508C only to Table 13Go

Changes from B Revision (January 2018) to C Revision

• Changed 在数据表标题和页脚中将 DAC80508Z、DAC70508Z、DAC60508Z、DAC80508M、DAC70508M、DAC60508M 更改为 DAC80508、DAC70508、DAC60508Go
• Changed 在“器件信息”表的说明中将 DAC80508Z 和 DAC80508M 更改成 DAC80508Go

Changes from A Revision (December 2017) to B Revision

• Added 将 2.4mm x 2.4mm，16 引脚 DSBGA 添加到了 特性 Go
• Added 将 DSBGA (16) 封装添加至器件信息 Go
• Added DSBGA pinoutGo
• Added DSBGA package pin number column to Pin Functions table Go
• Added YZF column to Thermal Information Go
• Added Offset error test conditions and DSBGA package specific row to Electrical Characteristics Go
• Added DSBGA Layout Example Go

Changes from * Revision (June 2017) to A Revision

• Changed 将“预告信息”更改为“混合状态”Go