米6体育平台手机版

ZHCSK15 July 2019 SN65C1168E-SEP

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

PW|16
- MPDS361A

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.6 Receiver Section Electrical Characteristics

over recommended ranges of common-mode input voltage, supply voltage, and operating free-air temperature
(unless otherwise noted)

PARAMETER		TEST CONDITIONS		MIN	TYP⁽¹⁾	MAX	UNIT
V_IT+	Positive-going input threshold voltage, differential input					0.2	V
V_IT–	Negative-going input threshold voltage, differential input			–0.2⁽²⁾			V
V_hys	Input hysteresis (V_IT+ – V_IT–)				60		mV
V_OH	High-level output voltage	V_ID = 200 mV, I_OH = –6 mA		3.8	4.2		V
V_OL	Low-level output voltage	V_ID = –200 mV, I_OL = 6 mA			0.1	0.3	V
I_I	Line input current	Other input at 0 V	V_I = 10 V			1.5	mA
I_I	Line input current	Other input at 0 V	V_I = –10 V			–2.5	mA
r_I	Input resistance	V_IC = –7 V to 7 V, other input at 0 V		4	17		kΩ
I_CC	Supply current (total package)	No load, Enabled	V_I = V_CC or GND		4	6	mA
I_CC	Supply current (total package)	No load, Enabled	V_IH = 2.4 V or 0.5 V⁽³⁾		5	9	mA
I_CC	Supply current (total package)⁽⁴⁾	No load	V_I = V_CC or GND			17	mA
I_CC	Supply current (total package)⁽⁴⁾	No load	V_I = 2.4 or 0.5 V⁽⁴⁾			16	mA

(1) All typical values are at V_CC = 5 V and T_A = 25°C.

(2) The algebraic convention, where the less positive (more negative) limit is designated as minimum, is used in this data sheet for common-mode input voltage and threshold voltage levels only.

(3) Refer to TIA/EIA-422-B for exact conditions.

(4) 25°C only. Post 20-krad(Si) HDR TID using worst case static biasing.