The power supply can be any voltage between the minimum and maximum supply voltage ratings located in the Recommended Operating Conditions table.

Each V_CC pin should have a good bypass capacitor to prevent power disturbance. For devices with a single supply. a 0.1-µF capacitor is recommended and if there are multiple V_CC pins then 0.01-µF or 0.022-µF capacitor is recommended for each power pin. It is ok to parallel multiple bypass capacitors to reject different frequencies of noise. 0.1-µF and 1-µF capacitors are commonly used in parallel. The bypass capacitor should be installed as close to the power pin as possible for best results.