ZHCSA82F September   2012  – August 2019 TLV713

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
    1.     Device Images
      1.      典型应用电路
      2.      压降电压与输出电流间的关系
  4. 4 修订历史记录
  5. 5 Pin Configurations and Functions
    1.     Pin Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagrams
    3. 7.3 Feature Description
      1. 7.3.1 Undervoltage Lockout (UVLO)
      2. 7.3.2 Shutdown
      3. 7.3.3 Foldback Current Limit
      4. 7.3.4 Thermal Protection
    4. 7.4 Device Functional Modes
      1. 7.4.1 Normal Operation
      2. 7.4.2 Dropout Operation
      3. 7.4.3 Disabled
  8. 8 Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Input and Output Capacitor Considerations
      2. 8.1.2 Dropout Voltage
      3. 8.1.3 Transient Response
      4. 8.1.4 UVLO Circuit Limitation
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
    3. 8.3 What to Do and What Not to Do
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
      1. 10.1.1 Board Layout Recommendations to Improve PSRR and Noise Performance
      2. 10.1.2 Power Dissipation
    2. 10.2 Layout Examples
  11. 11器件和文档支持
    1. 11.1 器件支持
      1. 11.1.1 开发支持
        1. 11.1.1.1 评估模块
        2. 11.1.1.2 Spice 模型
      2. 11.1.2 器件命名规则
    2. 11.2 文档支持
      1. 11.2.1 相关文档
    3. 11.3 接收文档更新通知
    4. 11.4 社区资源
    5. 11.5 商标
    6. 11.6 静电放电警告
    7. 11.7 Glossary
  12. 12机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

6.5 Electrical Characteristics

Over operating temperature range (TJ = –40°C to 125°C), VIN(nom) = VOUT(nom) + 0.5 V or VIN(nom) = 2 V (whichever is greater), IOUT = 1 mA, VEN = VIN, and COUT = 0.47 µF, unless otherwise noted. Typical values are at TJ = 25°C.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
VIN Input voltage range 1.4 5.5 V
VOUT Output voltage range 1 3.3 V
DC output accuracy VOUT ≥ 1.8 V, TJ = 25°C –1% 1%
VOUT < 1.8 V, TJ = 25°C –20 20 mV
VOUT ≥ 1.2 V, –40°C ≤ TJ ≤ 125°C –1.5% 1.5%
VOUT < 1.2 V, –40°C ≤ TJ ≤ 125°C –50 50 mV
ΔVOUT(ΔVIN) Line regulation Max {VOUT(nom) + 0.5 V, VIN = 2.0 V} ≤ VIN ≤ 5.5 V 1 5 mV
ΔVOUT(ΔIOUT) Load regulation 0 mA ≤ IOUT ≤ 150 mA 10 30 mV
VDO Dropout voltage VOUT = 0.98 × VOUT(nom),
TJ = –40°C to 85°C		 1 V ≤ VOUT < 1.8 V, IOUT = 150 mA 600 900 mV
VOUT = 1.1 V, IOUT = 100 mA 470 600
1.8 V ≤ VOUT < 2.1 V, IOUT = 30 mA 70
1.8 V ≤ VOUT < 2.1 V, IOUT = 150 mA 350 575
2.1 V ≤ VOUT < 2.5 V, IOUT = 30 mA 90
2.1 V ≤ VOUT < 2.5 V, IOUT = 150 mA 290 481
2.5 V ≤ VOUT < 3 V, IOUT = 30 mA 50
2.5 V ≤ VOUT < 3 V, IOUT = 150 mA 246 445
3 V ≤ VOUT < 3.6 V, IOUT = 30 mA 46
3 V ≤ VOUT < 3.6 V, IOUT = 150 mA 230 420
VOUT = 0.98 × VOUT(nom),
TJ = –40°C to 125°C		 1 V ≤ VOUT < 1.8 V, IOUT = 150 mA 600 1020
VOUT = 1.1 V, IOUT = 100 mA 470 720
1.8 V ≤ VOUT < 2.1 V, IOUT = 150 mA 350 695
2.1 V ≤ VOUT < 2.5 V, IOUT = 150 mA 290 601
2.5 V ≤ VOUT < 3 V, IOUT = 150 mA 246 565
3 V ≤ VOUT < 3.6 V, IOUT = 150 mA 230 540
IGND Ground pin current IOUT = 0 mA 50 75 µA
ISHUTDOWN Shutdown current VEN ≤ 0.4 V, 2.0 V ≤ VIN ≤ 5.5 V, TJ = 25°C 0.1 1 µA
PSRR Power-supply rejection ratio VIN = 3.3 V,
VOUT = 2.8 V,
IOUT = 30 mA		 f = 100 Hz 70 dB
f = 10 kHz 55
f = 1 MHz 55
Vn Output noise voltage BW = 100 Hz to 100 kHz, VIN = 2.3 V, VOUT = 1.8 V, IOUT = 10 mA 73 µVRMS
tSTR Start-up time(1) COUT = 1.0 μF, IOUT = 150 mA 100 µs
VHI Enable high (enabled) 0.9 VIN V
VLO Enable low (disabled) 0 0.4 V
IEN EN pin current EN = 5.5 V 0.01 µA
RPULLDOWN Pulldown resistor (TLV713P only) VIN = 4 V 120 Ω
ILIM Output current limit VIN = 3.8 V, VOUT = 3.3 V, TJ = –40 to 85°C 180 mA
VIN = 2.25 V, VOUT = 1.8 V, TJ = –40 to 85°C 180
VIN = 2.0 V, VOUT = 1.2 V, TJ = –40 to 85°C 180
ISC Short-circuit current VOUT = 0 V 40 mA
TSD Thermal shutdown Shutdown, temperature increasing 158 °C
Reset, temperature decreasing 140
(1) Start-up time is the time from EN assertion to (0.98 × VOUT(nom)).
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |