米6体育平台手机版

ZHCSSL6B July 2023 – March 2024 TPS7H6003-SP , TPS7H6013-SP , TPS7H6023-SP

PRODMIX

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

HBX|48

散热焊盘机械数据 (封装 | 引脚)

订购信息

7.6 Switching Characteristics

Specifications are over ambient temperature operating range T_A = –55°C to 125°C, VIN = 10 V to 14 V, V_BP5L= V_BP5H= 5 V, and no load on LOH, LOL, HOH, and HOL (unless otherwise noted).

PARAMETER		TEST CONDITIONS		SUBGROUP⁽¹⁾	TYP	MAX	UNIT
t_LPHL	LO turnoff propagation delay	MODE = PWM	PWM rising to LOL falling	9, 10, 11	30	48	ns
t_LPHL	LO turnoff propagation delay	MODE = IIM	LI falling to LOL falling	9, 10, 11	27	38	ns
t_LPLH	LO turnon propagation delay	MODE = IIM	LI rising to LOH rising	9, 10, 11	24	38	ns
t_HPHL	HO turnoff propagation delay	MODE = PWM	PWM falling to HOL falling	9, 10, 11	35	50	ns
t_HPHL	HO turnoff propagation delay	MODE = IIM	HI falling to HOL falling	9, 10, 11	30	40	ns
t_HPLH	HO turnon propagation delay	MODE = IIM	HI rising to HOH rising	9, 10, 11	26	40	ns
t_MON	Delay matching LO on and HO off⁽³⁾	MODE = IIM		9, 10, 11	5.5	12	ns
t_MOFF	Delay matching LO off and HO on⁽³⁾	MODE = IIM		9, 10, 11	1.5	4	ns
t_HRC	HO rise time	C_L = 1000 pF	10% to 90%	9, 10, 11	3.5	7.5	ns
t_LRC	LO rise time		10% to 90%	9, 10, 11	3	7.5
t_HFC	HO fall time		90% to 10%	9, 10, 11	4	5.5
t_LFC	LO fall time		90% to 10%	9, 10, 11	3	5.5
t_{PW_IIM}	Minimum input pulse width (turn-on)	MODE = IIM		9, 10, 11	5	8	ns
t_{PW_IIM_OFF}	Minimum input pulse width (turn-off)	MODE = IIM		9, 10, 11	8	12	ns
t_{PW_PWM}	Minimum required input pulse width for targeted dead time ⁽²⁾	MODE = PWM, RLH = 11.8 kΩ, RHL = 13.3 kΩ, DT reduction ≤ 2 ns			22		ns
t_{PW_PWM}	Minimum required input pulse width for targeted dead time ⁽²⁾	MODE = PWM, RLH = 21 kΩ, RHL = 23.7 kΩ, DT reduction ≤ 3 ns			30		ns

(1) Subgroups are applicable for QML parts. For subgroup definitions, see the Quality Conformance Inspection table.

(2) Specified by design; not tested in production.

(3) Specification limits for this parameter are respresented as an absolute value.