ZHCSEM3F February   2016  – January 2023 TPS82130

PRODUCTION DATA  

  1. 特性
  2. 应用
  3. 说明
  4. Revision History
  5. Pin Configuration and Functions
  6. 规格
    1. 6.1 绝对最大额定值
    2. 6.2 ESD 等级
    3. 6.3 建议运行条件
    4. 6.4 热性能信息
    5. 6.5 电气特性
    6. 6.6 典型特性
  7. Detailed Description
    1. 7.1 概述
    2. 7.2 Functional Block Diagram
    3. 7.3 特性说明
      1. 7.3.1 PWM 和 PSM 运行
      2. 7.3.2 低压降运行(100% 占空比)
      3. 7.3.3 开关电流限值
      4. 7.3.4 欠压锁定
      5. 7.3.5 Thermal Shutdown
    4. 7.4 器件功能模式
      1. 7.4.1 启用和禁用(EN)
      2. 7.4.2 软启动(SS/TR)
      3. 7.4.3 电压跟踪(SS/TR)
      4. 7.4.4 电源正常输出(PG)
  8. 应用和实现
    1. 8.1 应用信息
    2. 8.2 Typical Applications
      1. 8.2.1 1.8-V Output Application
        1. 8.2.1.1 设计要求
        2. 8.2.1.2 详细设计过程
          1. 8.2.1.2.1 Custom Design with WEBENCH® Tools
          2. 8.2.1.2.2 Setting the Output Voltage
          3. 8.2.1.2.3 Input and Output Capacitor Selection
          4. 8.2.1.2.4 软启动电容器选型
        3. 8.2.1.3 应用性能曲线
    3. 8.3 电源建议
    4. 8.4 布局
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 布局示例
      3. 8.4.3 Thermal Consideration
  9. 器件和文档支持
    1. 9.1 器件支持
      1. 9.1.1 开发支持
        1. 9.1.1.1 第三方米6体育平台手机版_好二三四免责声明
        2. 9.1.1.2 Custom Design with WEBENCH® Tools
    2. 9.2 Documentation Support
      1. 9.2.1 Related Documentation
    3. 9.3 接收文档更新通知
    4. 9.4 支持资源
    5. 9.5 商标
    6. 9.6 术语表
    7. 9.7 静电放电警告
  10. 10机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
  • SIL|8
散热焊盘机械数据 (封装 | 引脚)
订购信息

Pin Configuration and Functions

Figure 5-1 SIL 8-Pin µSiL Package(SIL0008C Top View)
Table 5-1 Pin Functions
PIN I/O DESCRIPTION
NAME NO.
EN 1 I Enable pin. Pull High to enable the device. Pull Low to disable the device. This pin has an internal pulldown resistor of typically 400 kΩ when the device is disabled.
VIN 2 PWR Input pin
GND 3 Ground pin
VOUT 4, 5 PWR Output pin
FB 6 I Feedback reference pin. An external resistor divider connected to this pin programs the output voltage.
PG 7 O Power-good open-drain output pin. A pullup resistor can be connected to any voltage less than 6 V. Leave this pin open if it is not used.
SS/TR 8 I Soft start-up and voltage tracking pin. An external capacitor connected to this pin sets the internal reference voltage rising time.
Exposed Thermal Pad The exposed thermal pad must be connected to the GND pin. Must be soldered to achieve appropriate power dissipation and mechanical reliability.