6.6 Switching Characteristics
over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V, RL = 200 Ω, CL = 10 pF
(unless otherwise noted) (see Figure 5 and Figure 6)
| PARAMETER |
FROM
(INPUT) |
TO
(OUTPUT) |
MIN |
TYP(1) |
MAX |
UNIT |
| tpd(2) |
I or Y |
Y or I |
|
0.25 |
|
ns |
| tPZH, tPZL |
E or S |
I or Y |
0.5 |
|
7 |
ns |
| tPHZ, tPLZ |
E or S |
I or Y |
0.5 |
|
5 |
ns |
| tsk(p)(3) |
I or Y |
Y or I |
|
0.1 |
0.2 |
ns |
(1) All typical values are at VCC = 3.3 V (unless otherwise noted), TA = 25°C.
(2) The propagation delay is the calculated RC time constant of the typical ON-state resistance of the switch and the specified load capacitance when driven by an ideal voltage source (zero output impedance).
(3) Skew between opposite transitions of the same output |tPHL – tPLH|. This parameter is not production tested.