米6体育平台手机版

SNVSBO5B December 2019 – May 2021 UCC12040

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DVE|16
- MPSS113C

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.6 Insulation Specifications

PARAMETER		TEST CONDITIONS	VALUE	UNIT
GENERAL
CLR	External clearance⁽¹⁾	Shortest terminal-to-terminal distance through air	> 8	mm
CPG	External creepage⁽¹⁾	Shortest terminal-to-terminal distance across the package surface	> 8	mm
DTI	Distance through the insulation	Minimum internal gap (internal clearance)	> 120	µm
CTI	Comparative tracking index	DIN EN 60112 (VDE 0303-11); IEC 60112	> 600	V
	Material group	According to IEC 60664-1	I
	Overvoltage Category	Rated mains voltage ≤ 300 V_RMS	I-IV
		Rated mains voltage ≤ 600 V_RMS	I-IV
		Rated mains voltage ≤ 1000 V_RMS	I-III
DIN V VDE V 0884-11:2017-01⁽²⁾
V_IORM	Maximum repetitive peak isolation voltage	AC voltage (bipolar)	1202	V_PK
V_IOWM	Maximum working isolation voltage	AC voltage (sine wave) Time dependent dielectric breakdown (TDDB) test	850	V_RMS
V_IOWM	Maximum working isolation voltage	DC voltage	1202	V_DC
V_IOTM	Maximum transient isolation voltage	V_TEST = V_IOTM, t = 60s (qualification); V_TEST = 1.2 × V_IOTM, t = 1s (100% production)	4243	V_PK
V_IOSM	Maximum surge isolation voltage⁽³⁾	Test method per IEC 62368-1, 1.2/50 µs waveform, V_TEST = 1.3 × V_IOSM = 6500 V_PK (qualification)	5000	V_PK
q_pd	Apparent charge⁽⁴⁾	Method a: After I/O safety test subgroup 2/3, V_ini = V_IOTM, t_ini = 60 s; V_pd(m) = 1.2 × V_IORM = 1442 V_PK, t_m = 10 s	≤ 5	pC
		Method a: After environmental tests subgroup 1, V_ini = V_IOTM, t_ini = 60 s; V_pd(m) = 1.2 × V_IORM = 1442 V_PK, t_m = 10 s	≤ 5
		Method b1: At routine test (100% production) and preconditioning (type test) V_ini = 1.2 × V_IOTM, t_ini = 1 s; V_pd(m) = 1.5 × V_IORM = 1803 V_PK, t_m = 1 s	≤ 5
C_IO	Barrier capacitance, input to output⁽⁵⁾	V_IO = 0.4 sin (2πft), f = 1 MHz	~3.5	pF
R_IO	Isolation resistance, input to output⁽⁵⁾	V_IO = 500 V, T_A = 25°C	> 10¹²	Ω
		V_IO = 500 V, 100°C ≤ T_A ≤ 125°C	> 10¹¹
		V_IO = 500 V at T_S = 150°C	> 10⁹
	Pollution degree		2
	Climatic category		40/125/21
UL 1577
V_ISO	Withstand isolation voltage	V_TEST = V_ISO = 3000 V_RMS, t = 60 s (qualification); V_TEST = 1.2 × V_ISO = 3600 V_RMS, t = 1 s (100% production)	3000	V_RMS

(1) Creepage and clearance requirements should be applied according to the specific equipment isolation standards of an application. Care should be taken to maintain the creepage and clearance distance of a board design to ensure that the mounting pads of the isolator on the printed-circuit board do not reduce this distance. Creepage and clearance on a printed-circuit board become equal in certain cases. Techniques such as inserting grooves and/or ribs on a printed circuit board are used to help increase these specifications.

(2) This coupler is suitable for safe electrical insulation only within the maximum operating ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits.

(3) Testing is carried out in air or oil to determine the intrinsic surge immunity of the isolation barrier.

(4) Apparent charge is electrical discharge caused by a partial discharge (pd).

(5) All pins on each side of the barrier tied together creating a two-terminal device