| 31-20 |
RESERVED |
R |
0x0 |
|
| 19 |
INTFAULT3 |
R/W |
0x0 |
Interrupt Fault 3.
0x0 = The fault condition for PWM generator 3 is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the fault condition for PWM generator 3 is asserted.
|
| 18 |
INTFAULT2 |
R/W |
0x0 |
Interrupt Fault 2.
0x0 = The fault condition for PWM generator 2 is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the fault condition for PWM generator 2 is asserted.
|
| 17 |
INTFAULT1 |
R/W |
0x0 |
Interrupt Fault 1.
0x0 = The fault condition for PWM generator 1 is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the fault condition for PWM generator 1 is asserted.
|
| 16 |
INTFAULT0 |
R/W |
0x0 |
Interrupt Fault 0.
0x0 = The fault condition for PWM generator 0 is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the fault condition for PWM generator 0 is asserted.
|
| 15-4 |
RESERVED |
R |
0x0 |
|
| 3 |
INTPWM3 |
R/W |
0x0 |
PWM3 Interrupt Enable.
0x0 = The PWM generator 3 interrupt is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the PWM generator 3 block asserts an interrupt.
|
| 2 |
INTPWM2 |
R/W |
0x0 |
PWM2 Interrupt Enable.
0x0 = The PWM generator 2 interrupt is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the PWM generator 2 block asserts an interrupt.
|
| 1 |
INTPWM1 |
R/W |
0x0 |
PWM1 Interrupt Enable.
0x0 = The PWM generator 1 interrupt is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the PWM generator 1 block asserts an interrupt.
|
| 0 |
INTPWM0 |
R/W |
0x0 |
PWM0 Interrupt Enable.
0x0 = The PWM generator 0 interrupt is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the PWM generator 0 block asserts an interrupt.
|