The primary purpose of the USB 2.0 signal conditioner is to restore the signal integrity of a USB High-Speed channel to USB 2.0 compliant levels. The platform goal is to pass the USB Near-End or Far-End Eye Mask with the device in the best location.

A typical use case is to place the USB 2.0 signal conditioner close to the USB connector on a host platform to pass Near-End Eye Mask testing. This includes systems where the USB connector may be placed at the far-end of a cable.

Typical RX sensitivity and boost recommendations based on cable length (28 AWG USB cable) are shown in Table 4-4. TI recommends starting with the lower settings first