SLYU065 March   2023 TMAG6180-Q1 , TMAG6181-Q1

 

  1.   Abstract
  2.   Trademarks
  3. 1Overview
    1. 1.1 Kit Contents
    2. 1.2 Related Documentation From Texas Instruments
  4. 2Hardware
    1. 2.1 Features
  5. 3Operation
    1. 3.1 Quick Start Setup
    2. 3.2 EVM Operation
      1. 3.2.1 Software Setup
        1. 3.2.1.1 Driver Installation
        2. 3.2.1.2 Firmware
          1. 3.2.1.2.1 Firmware Debug
        3. 3.2.1.3 GUI Setup and Usage
          1. 3.2.1.3.1 Initial Setup
          2. 3.2.1.3.2 GUI Operation
  6. 4Schematics, PCB Layout, and Bill of Materials
    1. 4.1 Schematics
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials

3.1 Quick Start Setup

  1. Download and install the PAMB Windows® USB driver: http://www.ti.com/lit/zip/sbac253.
  2. Attach the EVM to the Sensor Control Board (TI-SCB) (see Figure 3-1).
    1. TI-SCB must be ordered separately.
  3. Apply a magnetic field to the sensor by doing one of the following:
    1. Connect the Rotate & Push module by attaching to the EVM (see Figure 3-10).
    2. Mount the EVM with the sensors aligned to the axis of rotation of a rotating magnet.
  4. Connect the EVM to a PC using a USB cable.
    1. Insert the micro USB cable into the TI-SCB Controller onboard USB receptacle J2.
    2. Plug the other end of the USB cable into a PC.
  5. Access the GUI from the following link in either a Firefox™ or Google Chrome™ browser:
    1. TMAG6180-6181EVM GUI: https://dev.ti.com/gallery/search/TMAG6180-6181.
  6. Select a device to test
    1. Click plots icon to advance to main device interface.
    2. EVM GUI defaultS to TMAG6180.
  7. Click Collect Data
  8. Observe the outputs in the GUI. See Section 3.2.1.3 for more information on GUI setup and operation.
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |