SNVU751 October 2020 LP875761-Q1
Table 5-1 lists EVM bill of materials. This is for output configurations listed in Table 2-1. See Section 7 for these configuration specific assembly details.
The LP875761-Q1 I/O lines are connected to the microcontroller through 0-Ω resistors. These resistors are assembled to match the default I/O configuration of the LP875761-Q1. If LP875761-Q1 ENx/GPIOx or PGOOD pins are configured as push-pull outputs, corresponding 0-Ω resistors (R25, R27, R28, R29) must be removed to prevent possible damage to the microcontroller I/O pins. In open-drain configuration the microcontroller internal pullups are enabled by the GUI and pullup resistors R14 to R20 are not needed.
| Designator | Description | Manufacturer | Part Number | Qty. |
|---|---|---|---|---|
| PCB | Printed Circuit Board | Any | BMC043 | 1 |
| C1, C2, C3, C4, C30, C31, C32, C33, C34, C35, C38, C39, C40, C41, C42, C43, C46, C47, C48, C49, C50, C54, C55, C56, C57, C58, C66, C67 | CAP, CERM, 22 µF, 10 V, ± 10%, X7R, AEC-Q200 Grade 1, 1206 | MuRata | GCM31CR71A226KE02 | 28 |
| C5, C6, C7, C8, C15, C16, C19, C20, C23, C24, C27, C28, C73, C80, C82, C88, C90 | CAP, CERM, 10 µF, 10 V, ± 10%, X7R, AEC-Q200 Grade 1, 0805 | MuRata | GCM21BR71A106KE22L | 17 |
| C9, C17, C21, C25, C29, C36, C44, C52, C60, C65, C72, C74, C75, C76, C77, C78, C79, C81, C83, C84, C85, C86, C89 | CAP, CERM, 0.1 µF, 16 V,± 5%, X7R, AEC-Q200 Grade 1, 0402 | MuRata | GCM155R71C104JA55D | 23 |
| C10, C11, C12, C13 | CAP, CERM, 390 pF, 50 V,± 5%, C0G/NP0, AEC-Q200 Grade 1, 0402 | TDK | CGA2B2C0G1H391J050BA | 4 |
| C14, C18, C22, C26, C37, C45, C53, C61, C95 | CAP, CERM, 0.01 µF, 50 V, ± 10%, C0G/NP0, AEC-Q200 Grade 1, 0402 | MuRata | GCM155R71H103KA55D | 9 |
| C63 | CAP, TA, 220 µF, 10 V, ± 10%, 0.15 Ω, SMD | AVX | TPSD227K010R0150 | 1 |
| C64 | CAP, CERM, 100 µF, 6.3 V, ± 20%, X5R, 0805 | MuRata | GRM21BR60J107M | 1 |
| C69, C70, C71, C87 | CAP, CERM, 15 pF, 100 V,± 5%, C0G/NP0, AEC-Q200 Grade 1, 0603 | MuRata | GCM1885C2A150JA16D | 4 |
| C91, C92, C93, C94 | CAP, CERM, 1 µF, 25 V, ± 10%, X7R, AEC-Q200 Grade 1, 0603 | MuRata | GCM188R71E105KA64D | 4 |
| D1 | Diode, Zener, 5.6 V, 1 W, SMA | Diodes Inc. | SMAZ5V6-13-F | 1 |
| D2 | Diode, Schottky, 30 V, 0.2 A, SOD-323 | Diodes Inc. | BAT42WS-7-F | 1 |
| H1, H2, H3, H4 | Bumpon, Hemisphere, 0.375 X 0.235, Black | 3M | SJ61A2 | 4 |
| H5 | CABLE MINI USB 5PIN 1M 2.0 VERS | Assman WSW | AK672M/2-1-R | 1 |
| J2 | Header, 100 mil, 2x2, Tin, SMT | Molex | 15-91-2040 | 1 |
| J3, J5, J8, J10, J11, J12, J14 | Header, 2.54 mm, 2x1, Tin, SMT | Harwin | M20-8770246 | 7 |
| J4, J13 | Terminal Block, 2x1, 5 mm, Green, TH | Phoenix Contact | 1935776 | 2 |
| J15 | Connector, Receptacle, Mini-USB Type B, R/A, Top Mount SMT | TE Connectivity | 1734035-2 | 1 |
| J16 | Header, 100 mil, 3x1, Gold, SMT | Samtec | TSM-103-01-L-SV | 1 |
| L1, L2, L3, L4 | Inductor, Shielded, 330 nH, 5.4 A, 0.017 Ω, AEC-Q200 Grade 1, SMD | MuRata Toko | DFE252012PD-R33M | 4 |
| L5, L6, L7, L8 | Ferrite Bead, 30 Ω at 100 MHz, 4 A, 0805 | MuRata | BLM21PG300SH1D | 4 |
| L9 | Inductor, Wirewound, Ferrite, 10 µH, 0.12 A, 0.5 Ω, SMD | Taiyo Yuden | LB2012T100KR | 1 |
| LBL1 | Thermal Transfer Printable Labels, 1.250" W x 0.250" H - 10,000 per roll | Brady | THT-13-457-10 | 1 |
| R1, R2, R3, R4 | RES, 3.9, 5%, 0.063 W, AEC-Q200 Grade 0, 0402 | Vishay-Dale | CRCW04023R90JNED | 4 |
| R5, R6, R7, R9, R10, R12, R21, R22, R23, R24, R25, R27, R28, R29 | RES, 0, 5%, 0.063 W, 0402 | Yageo America | RC0402JR-070RL | 14 |
| R8 | RES, 0.01, 1%, 3 W, 2512 | Bourns | CRA2512-FZ-R010ELF | 1 |
| R30 | RES, 6.80 k, 1%, 0.1 W, 0603 | Yageo America | RC0603FR-076K8L | 1 |
| R31, R32 | RES, 39.0, 1%, 0.1 W, 0603 | Yageo America | RC0603FR-0739RL | 2 |
| R33 | RES, 68.0 k, 1%, 0.1 W, 0603 | Yageo America | RC0603FR-0768KL | 1 |
| R34 | RES, 33.0 k, 1%, 0.1 W, 0603 | Yageo America | RC0603FR-0733KL | 1 |
| R35 | RES, 1.00, 1%, 0.1 W, 0603 | Yageo America | RC0603FR-071RL | 1 |
| R36 | RES, 470 k, 5%, 0.1 W, AEC-Q200 Grade 0, 0603 | Vishay-Dale | CRCW0603470KJNEA | 1 |
| R37, R38 | RES, 1.00 k, 1%, 0.1 W, AEC-Q200 Grade 0, 0603 | Vishay-Dale | CRCW06031K00FKEA | 2 |
| SH-J1, SH-J2, SH-J3, SH-J4, SH-J5 | Shunt, 100 mil, Gold plated, Black | TE Connectivity | 881545-2 | 5 |
| TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14 | Test Point, Miniature, SMT | Keystone | 5015 | 14 |
| U1 | Four-Phase DC/DC Buck Converter, RNF0026C (VQFN-HR-26) | Texas Instruments | LP875761ARNFRQ1 | 1 |
| U2 | AT91SAM ARM-based Flash MCU, LQFP100 | Atmel | ATSAM3U2CA-AU | 1 |
| U3 | Dual Linear Regulator with 300 mA and 150 mA Outputs and Power-On-Reset, 10-pin LLP, Pb-Free | Texas Instruments | LP3996SD-1833/NOPB | 1 |
| Y1 | Crystal, 12 MHz, 12pF, SMD | AVX | CX5032GB12000H0PESZZ | 1 |
| C51, C59 | CAP, CERM, 22 µF, 10 V, ± 10%, X7R, AEC-Q200 Grade 1, 1206 | MuRata | GCM31CR71A226KE02 | 0 |
| C62, C68 | CAP, CERM, 0.1 µF, 16 V,± 5%, X7R, AEC-Q200 Grade 1, 0402 | MuRata | GCM155R71C104JA55D | 0 |
| J1, J6 | Header, 100 mil, 2x1, Gold, TH | Samtec | TSW-102-07-G-S | 0 |
| J7 | Terminal Block, 8x1, 2.54 mm, TH | Phoenix Contact | 1725711 | 0 |
| J9 | Receptacle, 2.5 mm, 3x2, Gold, SMT | TE Connectivity | 6651712-1 | 0 |
| R11, R13, R26 | RES, 0, 5%, 0.063 W, 0402 | Yageo America | RC0402JR-070RL | 0 |
| R14, R15, R16, R17, R18, R19, R20 | RES, 1.8 k, 5%, 0.1 W, AEC-Q200 Grade 0, 0603 | Vishay-Dale | CRCW06031K80JNEA | 0 |