米6体育平台手机版

ZHCSN92H January 2020 – May 2022 ISO6720-Q1 , ISO6721-Q1 , ISO6721R-Q1

PRODUCTION DATA

7.14 Switching Characteristics—5-V Supply

V_CC1 = V_CC2 = 5 V ± 10% (over recommended operating conditions unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
t_PLH, t_PHL	Propagation delay time	See Figure 8-1		11	18	ns
t_P(dft)	Propagation delay drift			8		ps/℃
t_UI	Minimum pulse width	See Figure 8-1	20			ns
PWD	Pulse width distortion(1) \|t_PHL – t_PLH\|	See Figure 8-1		0.2	7	ns
t_sk(o)	Channel-to-channel output skew time (2)	Same direction channels			6	ns
t_sk(p-p)	Part-to-part skew time (3)				6	ns
t_r	Output signal rise time	See Figure 8-1		2.6	4.5	ns
t_f	Output signal fall time	See Figure 8-1		2.6	4.5	ns
t_PU	Time from UVLO to valid output data				300	us
t_DO	Default output delay time from input power loss	Measured from the time V_CC goes below 1.2V. See Figure 8-2		0.1	0.3	us
t_ie	Time interval error	2¹⁶ – 1 PRBS data at 50 Mbps		1		ns

(1) Also known as pulse skew.

(2) t_sk(o) is the skew between outputs of a single device with all driving inputs connected together and the outputs switching in the same direction while driving identical loads.

(3) t_sk(pp) is the magnitude of the difference in propagation delay times between any terminals of different devices switching in the same direction while operating at identical supply voltages, temperature, input signals and loads.