Home Data converters Analog-to-digital converters (ADCs) High-speed ADCs (≥10 MSPS)
Home
Data converters
Analog-to-digital converters (ADCs)
High-speed ADCs (≥10 MSPS)

ADC12DJ5200SE

ACTIVE

Singled-ended input RF-sampling 12-bit ADC with dual-channel 5.2 GSPS or single-channel 10.4 GSPS

Order now
Data sheet

ADC12DJ5200SE

ACTIVE
Data sheet Order now

Product details

Sample rate (max) (Msps) 5200, 10400 Resolution (Bits) 12 Number of input channels 1, 2 Interface type JESD204B, JESD204C Analog input BW (MHz) 6300 Features High Performance, Ultra High Speed Rating Catalog Power consumption (typ) (mW) 4000 Architecture Folding Interpolating SNR (dB) 53.2 ENOB (Bits) 8.4 SFDR (dB) 65 Operating temperature range (°C) -40 to 85 Input buffer Yes
Sample rate (max) (Msps) 5200, 10400 Resolution (Bits) 12 Number of input channels 1, 2 Interface type JESD204B, JESD204C Analog input BW (MHz) 6300 Features High Performance, Ultra High Speed Rating Catalog Power consumption (typ) (mW) 4000 Architecture Folding Interpolating SNR (dB) 53.2 ENOB (Bits) 8.4 SFDR (dB) 65 Operating temperature range (°C) -40 to 85 Input buffer Yes
FCCSP (AAV) 144 100 mm² 10 x 10
  • ADC core:
    • 12-bit resolution
    • Up to 10.4GSPS in single-channel mode
    • Up to 5.2GSPS in dual-channel mode
  • Single Ended 50Ω Inputs:
    • Analog input range (–3dB): 2 to 6.3GHz
    • Full-scale input power (4.5GHz): - 1.25dBm
    • Flexible VCM: AC coupled with no DC path to GND or supply
  • Performance specifications:
    • Noise floor (2.3GHz, –20dBFS,INPUTFS = 1.5dBm):
      • Dual-channel mode: –149dBFS/Hz
      • Single-channel mode: –151.5dBFS/Hz
    • ENOB (dual channel, FIN = 2.3GHz): 8.5 Bits
  • Noiseless aperture delay (tAD) adjustment:
    • Precise sampling control: 19fs Step
    • Simplifies synchronization and interleaving
    • Temperature and voltage invariant delays
  • Easy-to-use synchronization features:
    • Automatic SYSREF timing calibration
    • Timestamp for sample marking
  • JESD204C serial data interface:
    • Maximum lane rate: 17.16Gbps
    • Support for 64b/66b and 8b/10b encoding
    • 8b/10b modes are JESD204B compatible
  • Optional digital down-converters (DDC):
    • 4x, 8x, 16x and 32x complex decimation
    • Four independent 32-Bit NCOs per DDC
  • Peak RF Input Power: +26.25dBm (+ 27.5dBFS, 560x fullscale power)
  • Programmable FIR filter for equalization
  • Power consumption: 4W
  • Power supplies: 1.1V, 1.9V
  • ADC core:
    • 12-bit resolution
    • Up to 10.4GSPS in single-channel mode
    • Up to 5.2GSPS in dual-channel mode
  • Single Ended 50Ω Inputs:
    • Analog input range (–3dB): 2 to 6.3GHz
    • Full-scale input power (4.5GHz): - 1.25dBm
    • Flexible VCM: AC coupled with no DC path to GND or supply
  • Performance specifications:
    • Noise floor (2.3GHz, –20dBFS,INPUTFS = 1.5dBm):
      • Dual-channel mode: –149dBFS/Hz
      • Single-channel mode: –151.5dBFS/Hz
    • ENOB (dual channel, FIN = 2.3GHz): 8.5 Bits
  • Noiseless aperture delay (tAD) adjustment:
    • Precise sampling control: 19fs Step
    • Simplifies synchronization and interleaving
    • Temperature and voltage invariant delays
  • Easy-to-use synchronization features:
    • Automatic SYSREF timing calibration
    • Timestamp for sample marking
  • JESD204C serial data interface:
    • Maximum lane rate: 17.16Gbps
    • Support for 64b/66b and 8b/10b encoding
    • 8b/10b modes are JESD204B compatible
  • Optional digital down-converters (DDC):
    • 4x, 8x, 16x and 32x complex decimation
    • Four independent 32-Bit NCOs per DDC
  • Peak RF Input Power: +26.25dBm (+ 27.5dBFS, 560x fullscale power)
  • Programmable FIR filter for equalization
  • Power consumption: 4W
  • Power supplies: 1.1V, 1.9V

The ADC12DJ5200SE is an RF-sampling, giga-sample, analog-to-digital converter (ADC) with integrated input baluns. The ADC12DJ5200SE can be configured as a dual-channel, 5.2 GSPS ADC or single-channel, 10.4 GSPS ADC. The -3dB input frequency range of 2 to 6.3GHz enables direct RF sampling of S-band and C-band for frequency agile systems.

The ADC12DJ5200SE uses a high-speed JESD204C output interface with up to 16 serialized lanes supporting up to 17.16Gbps line rate. Deterministic latency and multi-device synchronization is supported through JESD204C subclass-1. The JESD204C interface can be configured to trade-off line rate and number of lanes. Both 8b/10b and 64b/66b data encoding schemes are supported. 64b/66b encoding supports forward error correction (FEC) for improved bit error rates. The interface is backwards compatible with JESD204B receivers.

Innovative synchronization features, including noiseless aperture delay adjustment and SYSREF windowing, simplify system design for multi-channel applications. Optional digital down converters (DDCs) are available to provide digital conversion to baseband and to reduce the interface rate. A programmable FIR filter allows on-chip equalization.

The ADC12DJ5200SE is an RF-sampling, giga-sample, analog-to-digital converter (ADC) with integrated input baluns. The ADC12DJ5200SE can be configured as a dual-channel, 5.2 GSPS ADC or single-channel, 10.4 GSPS ADC. The -3dB input frequency range of 2 to 6.3GHz enables direct RF sampling of S-band and C-band for frequency agile systems.

The ADC12DJ5200SE uses a high-speed JESD204C output interface with up to 16 serialized lanes supporting up to 17.16Gbps line rate. Deterministic latency and multi-device synchronization is supported through JESD204C subclass-1. The JESD204C interface can be configured to trade-off line rate and number of lanes. Both 8b/10b and 64b/66b data encoding schemes are supported. 64b/66b encoding supports forward error correction (FEC) for improved bit error rates. The interface is backwards compatible with JESD204B receivers.

Innovative synchronization features, including noiseless aperture delay adjustment and SYSREF windowing, simplify system design for multi-channel applications. Optional digital down converters (DDCs) are available to provide digital conversion to baseband and to reduce the interface rate. A programmable FIR filter allows on-chip equalization.
filter Find other High-speed ADCs (≥10 MSPS)
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet ADC12DJ5200SE 10.4GSPS Single-Channel or 5.2GSPS Dual-Channel, 12-bit, RF-Sampling Analog-to-Digital Converter (ADC) with Integrated Baluns datasheet (Rev. B) PDF | HTML 03 Jun 2024
User guide ADCxxDJxx00RF Evaluation Module User's Guide (Rev. B) PDF | HTML 02 Mar 2023

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

ADC12DJ5200SEEVM — ADC12DJ5200SE evaluation module for single-ended input RF-sampling 12-bit ADC

The ADC12DJ5200SE evaluation module (EVM) is a platform used to evaluate the ADC12DJ5200SE analog-to-digital converter (ADC). The ADC12DJ5200SE is a dual-channel, 12-bit ADC capable of operating at sampling rates up to 5.2-Giga-samples per second (GSPS) in dual-channel mode, or 10.4-GSPS in (...)

Not available on TI.com
Simulation model

ADC12DJ5200SE S-Parameter Model

SLVME17.ZIP (176 KB) - S-Parameter Model
Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins CAD symbols, footprints & 3D models
FCCSP (AAV) 144 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos