The ADC16DV160 is a monolithic dual channel high performance CMOS analog-to-digital converter capable of converting analog input signals into 16-bit digital words at rates up to 160 Mega Samples Per Second (MSPS). This converter uses a differential, pipelined architecture with digital error correction and an on-chip sample-and-hold circuit to minimize power consumption and external component count while providing excellent dynamic performance. Automatic power-up calibration enables excellent dynamic performance and reduces part-to-part variation, and the ADC16DV160 can be re-calibrated at any time through the 3-wire Serial Peripheral Interface (SPI). An integrated low noise and stable voltage reference and differential reference buffer amplifier eases board level design. The on-chip duty cycle stabilizer with low additive jitter allows a wide range of input clock duty cycles without compromising dynamic performance. A unique sample-and-hold stage yields a full-power bandwidth of 1.4 GHz. The interface between the ADC16DV160 and a receiver block can be easily verified and optimized via fixed pattern generation and output clock position features. The digital data is provided via dual data rate LVDS outputs – making possible the 68-pin, 10 mm x 10 mm VQFN package. The ADC16DV160 operates on dual power supplies of +1.8V and +3.0V with a power-down feature to reduce power consumption to very low levels while allowing fast recovery to full operation.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | Dual Channel, 16-Bit, 160 MSPS Analog-to-Digital Converter with DDR LVDS Outputs datasheet (Rev. H) | 19 Feb 2013 | |
| Application note | Design Considerations for Avoiding Timing Errors during High-Speed ADC, LVDS Dat (Rev. A) | 22 May 2015 | ||
| Application note | Signal Chain Noise Figure Analysis | 29 Oct 2014 | ||
| Application note | Why Use Oversampling when Undersampling Can Do the Job? (Rev. A) | 19 Jul 2013 | ||
| EVM User's guide | AN-1942 LMH6517 Evaluation Board (Rev. B) | 26 Apr 2013 | ||
| Application note | AN-2177 Using the LMH6554 as a ADC Driver (Rev. A) | 26 Apr 2013 | ||
| Application note | Between the Amplifier and ADC: Managing Filter Loss in Communications Systems (Rev. B) | 26 Apr 2013 | ||
| Application note | Drivng HSpeed ADCs w/LMH6521 DVGA for High IF AC-Coupled Apps (Rev. A) | 26 Apr 2013 | ||
| User guide | High-IF Sub-sampling Receiver Subsystem User Guide | 27 Jan 2012 | ||
| EVM User's guide | ADC16DV160HFEB Evaluation Board User Guide | 25 Jan 2012 |
For additional terms or required resources, click any title below to view the detail page where available.
This Design Kit is designed to ease evaluation and design-in of Texas Instruments' ADC16DV160 Dual Channel 16-bit Analog-to-Digital Converter with DDR LVDS outputs, which operates at speeds up 160 Msps.
The evaluation board can be used by connecting the board to the WaveVision 5.1 Data Capture Board (...)
WaveVision 5 software is part of the WaveVision evaluation system that also includes WaveVision 5 Data Capture Board. The WaveVision 5 system is an easy-to-use data acquisition and analysis tool, designed to help users evaluate Texas Instruments' Signal Path solutions.
While WaveVision 5 software (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| VQFNP (NKE) | 68 | Ultra Librarian |
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.