Driver or library
AFE81XX-WI-DESIGN — AFE81xx Design Resources
AFE8190 Evaluation Collaterals
AFE8190
- Sixteen RF sampling 12GSPS transmit DACs
- Sixteen RF sampling 5GSPS receive ADCs
- Quad RF sampling 5GSPS feedback ADCs
- Maximum RF signal bandwidth:
- TX/FB: 800MHz.
- RX: 600MHz
- RF frequency range: up to 7.2GHz
- Digital Step Attenuators (DSA):
- TX: 39dB range, 1dB analog and 0.125dB digital steps
- RX: 30dB range, 1dB step
- FB: 25dB range, 1dB step
- Single DUC/DDCs per chain
- Supports TDD operation with fast switching between TX and RX
- Internal PLL/VCO to generate DAC/ADC clocks
- Optional external CLK at DAC or ADC rate
- Digital Data Interface:
- JESD204B and JESD204C
- 16 SerDes transceivers up to 32.5Gbps
- 8b/10b and 64b/66b Encoding
- 12-bit, 16-bit, 24-bit and 32-bit resolution
- Subclass 1 multi-device synchronization
- Package:
- 23mm × 23mm FCBGA, 0.8mm pitch
The AFE8190 is a high performance, wide bandwidth multi-channels transceiver, integrating sixteen RF sampling transmitter chains, sixteen RF sampling receiver chains and four separate RF sampling auxiliary chains (feedback paths). The high dynamic range of the transmitter and receiver chains allows generating and receiving 3G, 4G and 5G signals for wireless base stations, while the wide bandwidth capability makes the AFE8190 an excellent choice for multi-band 4G and 5G base stations.
Each receiver chain includes a 30dB range DSA (Digital Step Attenuator), followed by a 5GSPS ADC (analog-to-digital converter). Each receiver channel has analog peak power detectors and digital peak and power detectors to assist an external or internal autonomous automatic gain controller, and RF overload detectors for device reliability protection. The single digital down converters (DDC) provides up to 600MHz of signal BW.
Each transmitter chain includes a digital up converters (DUCs) supporting up to 800MHz of signal bandwidth. The output of the DUCs drives a 12GSPS DAC (digital to analog converter) with a mixed mode output option to enhance 2nd Nyquist operation. The DAC output includes a variable gain amplifier (TX DSA) with 39dB range and 1dB analog and 0.125dB digital steps.
Technical documentation
No results found. Please clear your search and try again.
View all 2 | Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | AFE8190 16-Channel RF Transceiver with Feedback Paths datasheet | PDF | HTML | 09 Sep 2024 |
| Certificate | AFE8190-35EVM EU Declaration of Conformity (DoC) | 19 Apr 2024 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
AFE8190EVM — AFE8190 evaluation module
The AFE8190EVM is used to evaluate the AFE8190 integrated RF sampling transceiver. The AFE8190 device supports up to 16 transmit, 16 receive and four feedback channels. The device integrates the phase-locked loop (PLL) and voltage-controlled oscillator (VCO) for generating data converter clocks.
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| FCBGA (AMJ) | 784 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.