Home Isolation Isolated ADCs
Home
Isolation
Isolated ADCs
NEW

AMC3306M05-Q1

ACTIVE

Automotive, ±50-mV reinforced isolated modulator with integrated DC/DC

Order now
Data sheet

AMC3306M05-Q1

ACTIVE
Data sheet Order now

Product details

Device type Current sensing Peak-to-peak input voltage range (V) 50mV Interface type Serial CMOS Sample rate (max) (Msps) 21 Rating Automotive CMTI (min) (kV/µs) 75 Number of input channels 1 Architecture Delta-Sigma SNR (dB) 77 Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 85.8 SFDR (dB) 87 Isolation rating Reinforced Withstand isolation voltage (VISO) (Vrms) 4250 Working isolation voltage (VIOWM) (Vrms) 1200 Transient isolation voltage (VIOTM) (VPK) 6 Creepage (min) (mm) 8 Clearance (min) (mm) 8
Device type Current sensing Peak-to-peak input voltage range (V) 50mV Interface type Serial CMOS Sample rate (max) (Msps) 21 Rating Automotive CMTI (min) (kV/µs) 75 Number of input channels 1 Architecture Delta-Sigma SNR (dB) 77 Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 85.8 SFDR (dB) 87 Isolation rating Reinforced Withstand isolation voltage (VISO) (Vrms) 4250 Working isolation voltage (VIOWM) (Vrms) 1200 Transient isolation voltage (VIOTM) (VPK) 6 Creepage (min) (mm) 8 Clearance (min) (mm) 8
SO-MOD (DWE) 16 106.09 mm² 10.3 x 10.3
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Single-supply operation (3.3V or 5V) with integrated DC/DC converter
  • Input voltage range (±50mV) optimized for current measurement using shunt resistors
  • Low DC errors:
    • Offset error: ±50µV (max)
    • Offset drift: ±0.4µV/°C (max)
    • Gain error: ±0.2% (max)
    • Gain drift: ±35ppm/°C (max)
  • High CMTI: 75kV/µs (min)
  • System-level diagnostic features
  • Low EMI: Meets CISPR-11 and CISPR-25 standards
  • Safety-related certifications:
    • 6000VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
    • 4250VRMS isolation for 1 minute per UL1577
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Single-supply operation (3.3V or 5V) with integrated DC/DC converter
  • Input voltage range (±50mV) optimized for current measurement using shunt resistors
  • Low DC errors:
    • Offset error: ±50µV (max)
    • Offset drift: ±0.4µV/°C (max)
    • Gain error: ±0.2% (max)
    • Gain drift: ±35ppm/°C (max)
  • High CMTI: 75kV/µs (min)
  • System-level diagnostic features
  • Low EMI: Meets CISPR-11 and CISPR-25 standards
  • Safety-related certifications:
    • 6000VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
    • 4250VRMS isolation for 1 minute per UL1577

The AMC3306M05-Q1 is a precision, isolated delta-sigma (ΔΣ) modulator, optimized for shunt-based current measurements. The fully integrated, isolated DC/DC converter allows single-supply operation from the low-side of the device which makes the device a unique solution for space-constrained applications. The reinforced capacitive isolation barrier is certified according to DIN EN IEC 60747-17 (VDE 0884-17) and UL1577 and supports a working voltage up to 1.2kVRMS.

The isolation barrier separates parts of the system that operate on different common-mode voltage levels and protects the low-voltage side from hazardous voltages and damage.

The input of the AMC3306M05-Q1 is optimized for direct connection to a low-impedance shunt resistor or other, low-impedance voltage source with low signal levels. The excellent DC accuracy and low temperature drift supports accurate current measurements over the extended industrial temperature range from –40°C to +125°C.

Use a digital filter (such as a sinc3 filter) to decimate the bitstream. By using this digital filter, the device achieves 16 bits of resolution with an 85dB dynamic range at a data rate of 78kSPS.

The AMC3306M05-Q1 is a precision, isolated delta-sigma (ΔΣ) modulator, optimized for shunt-based current measurements. The fully integrated, isolated DC/DC converter allows single-supply operation from the low-side of the device which makes the device a unique solution for space-constrained applications. The reinforced capacitive isolation barrier is certified according to DIN EN IEC 60747-17 (VDE 0884-17) and UL1577 and supports a working voltage up to 1.2kVRMS.

The isolation barrier separates parts of the system that operate on different common-mode voltage levels and protects the low-voltage side from hazardous voltages and damage.

The input of the AMC3306M05-Q1 is optimized for direct connection to a low-impedance shunt resistor or other, low-impedance voltage source with low signal levels. The excellent DC accuracy and low temperature drift supports accurate current measurements over the extended industrial temperature range from –40°C to +125°C.

Use a digital filter (such as a sinc3 filter) to decimate the bitstream. By using this digital filter, the device achieves 16 bits of resolution with an 85dB dynamic range at a data rate of 78kSPS.
filter Find other Isolated ADCs
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet AMC3306M05-Q1 Automotive, Precision, ±50mV Input, Reinforced Isolated Delta-Sigma Modulator With Integrated DC/DC Converter datasheet PDF | HTML 02 Aug 2024
Certificate UL Certificate of Compliance Vol4 Sec5 E181974 (Rev. A) 23 Jan 2023

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

AMC3306EVM — AMC3306 precision reinforced isolated modulator with integrated DC/DC converter evaluation module

The AMC3306 evaluation module (EVM) is a platform for evaluating the AMC3306 product, a precision isolated amplifier with an integrated DC/DC converter that powers the high side of the amplifier. AMC3306 is a 7-kV reinforced isolation modulator designed for use in current shunt measuring (...)

User guide: PDF | HTML
Not available on TI.com
Calculation tool

MODULATOR-TIMING-EXCEL-CALC — Isolated Modulator Digital Communication Timing Calculation Tool

Use this excel calculator to confirm the correct clock setup and hold timing compensation method with an isolated modulator and SDFM controller.
Supported products & hardware

Supported products & hardware

Products
Isolated ADCs
AMC1303E0510 — ±50-mV input, current sensing reinforced isolated modulator with 10-MHz int clock & Manchester code AMC1303E0520 — ±50-mV input, current sensing reinforced isolated modulator with 20-MHz int clock & Manchester code AMC1303E2510 — ±250-mV input, current sensing reinforced isolated modulator with 10-MHz int clock & Manchester code AMC1303E2520 — ±250-mV input, current sensing reinforced isolated modulator with 20-MHz int clock & Manchester code AMC1303M0510 — ±50-mV input, precision current sensing reinforced isolated modulator with 10-MHz int clock AMC1303M0520 — ±50-mV input, precision current sensing reinforced isolated modulator with 20-MHz int clock AMC1303M2510 — ±250-mV input, precision current sensing reinforced isolated modulator with 10-MHz int clock AMC1303M2520 — ±250-mV input, precision current sensing reinforced isolated modulator with 20-MHz int clock AMC1304L05 — ±50-mV input, precision current sensing reinforced isolated modulator with LDO & LVDS interface AMC1304L05-Q1 — Automotive, ±50-mV input, current sensing reinforced isolated modulator with LDO & LVDS interface AMC1304L25 — ±250-mV input, precision current sensing reinforced isolated modulator with LDO & LVDS Interface AMC1304L25-Q1 — Automotive, ±250-mV input, current sensing reinforced isolated modulator with LDO & LVDS Interface AMC1304M05 — ±50-mV input, precision current sensing reinforced isolated modulator with LDO AMC1304M05-Q1 — Automotive, ±50-mV input, precision current sensing reinforced isolated modulator with LDO AMC1304M25 — ±250-mV input, precision current sensing reinforced isolated modulator with LDO AMC1304M25-Q1 — Automotive, ±250-mV input, precision current sensing reinforced isolated modulator with LDO AMC1305L25 — ±250-mV input, precision current sensing reinforced isolated modulator with LVDS interface AMC1305L25-Q1 — Automotive, ±250-mV input, current sensing reinforced isolated modulator with LVDS Interface AMC1305M05 — ±50-mV input, precision current sensing reinforced isolated modulator AMC1305M05-Q1 — Automotive, ±50-mV input, precision current sensing reinforced isolated modulator AMC1305M25 — ±250-mV input, precision current sensing reinforced isolated modulator AMC1305M25-Q1 — Automotive, ±250-mV input, precision current sensing reinforced isolated modulator AMC1306E05 — ±50-mV input, precision current sensing reinforced isolated modulator with Manchester code AMC1306E25 — ±250-mV input, precision current sensing reinforced isolated modulator with Manchester code AMC1306M05 — ±50-mV input, precision current sensing reinforced isolated modulator AMC1306M05-Q1 — Automotive, ±50-mV input, precision current sensing reinforced isolated modulator AMC1306M25 — ±250-mV input, precision current sensing reinforced isolated modulator AMC1306M25-Q1 — Automotive, ±250-mV input, precision current sensing reinforced isolated modulator AMC1306M25E — Reinforced isolated modulator with -55C extended temperature range AMC3306M05 — ±50-mV input, precision current sensing reinforced isolated modulator with integrated DC/DC AMC3306M05-Q1 — Automotive, ±50-mV reinforced isolated modulator with integrated DC/DC AMC3306M25 — ±250-mV input, precision current sensing reinforced isolated modulator with integrated DC/DC AMC3306M25-Q1 — Automotive, ±250-mV reinforced isolated modulator with integrated DC/DC
Download options
Package Pins CAD symbols, footprints & 3D models
SO-MOD (DWE) 16 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos