CC3135MOD
SimpleLink™ 32-bit Arm Cortex-M3 dual-band Wi-Fi® wireless network processor module
CC3135MOD
- Fully integrated and green/RoHS module includes all required clocks, serial peripheral interface (SPI) flash, and passives
- Integrated Wi-Fi® and internet protocols
- 802.11a/b/g/n: 2.4 GHz and 5 GHz
- FCC, IC/ISED, ETSI/CE, and MIC certified
- FIPS 140-2 Level 1 validated IC inside
- Rich set of IoT security features helps developers protect data
- Low-power modes for battery powered application
- Coexistence with 2.4 GHz radios
- Industrial temperature: –40°C to +85°C
- Wi-Fi network processor subsystem:
- Wi-Fi core:
- 802.11 a/b/g/n 2.4 GHz and 5 GHz
- Modes:
- Access Point (AP)
- Station (STA)
- Wi-Fi Direct (only supported on 2.4 GHz)
- Security:
- WEP
- WPA™/ WPA2™ PSK
- WPA2 Enterprise
- WPA3™ Personal
- WPA3™ Enterprise
- Internet and application protocols:
- HTTPs server, mDNS, DNS-SD, DHCP
- IPv4 and IPv6 TCP/IP stack
- 16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)
- Built-in power management subsystem:
- Configurable low-power profiles (always on, intermittently connected, tag)
- Advanced low-power modes
- Integrated DC/DC regulators
- Wi-Fi core:
- Application throughput
- UDP: 16 Mbps
- TCP: 13 Mbps
- Multilayered Security Features:
- Separate execution environments
- Networking security
- Device identity and key
- Hardware accelerator cryptographic engines (AES, DES, SHA/MD5, CRC)
- File system security (encryption, authentication, access control)
- Initial secure programming
- Software tamper detection
- Secure boot
- Certificate signing request (CSR)
- Unique per device key pair
- Recovery mechanism – ability to recover to factory defaults
- Power-Management Subsystem:
- Integrated DC/DC converters support a wide range of supply voltage:
- Single wide-voltage supply, VBAT: 2.3 V to 3.6 V
- Advanced low-power modes:
- Shutdown: 1 µA, hibernate: 5.5 µA
- Low-power deep sleep (LPDS): 115 µA
- Idle connected (MCU in LPDS): 710 µA
- RX traffic (MCU active): 53 mA
- TX traffic (MCU active): 223 mA
- Integrated DC/DC converters support a wide range of supply voltage:
- Wi-Fi TX power
- 2.4 GHz: 16 dBm at 1 DSSS
- 5 GHz: 15.1 dBm at 6 OFDM
- Wi-Fi RX sensitivity
- 2.4 GHz: –94.5 dBm at 1 DSSS
- 5 GHz: –89 dBm at 6 OFDM
- Additional integrated components on module
- 40.0 MHz crystal with internal oscillator
- 32.768 kHz crystal (RTC)
- 32 Mbit SPI Serial Flash
- RF filters, diplexer, and passive components
- QFM package
- 1.27-mm pitch, 63-pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
- Module supports SimpleLink Developers Ecosystem
The CC3135MOD is an FCC, IC/ISED, ETSI/CE, MIC, and Wi-Fi CERTIFIED™ module that dramatically simplifies the implementation of Internet connectivity. This dual-band Wi-Fi network processor module can be added to any low-cost, low-power microcontroller unit (MCU); it integrates all protocols for Wi-Fi® and Internet, which greatly minimize host MCU software requirements.
This ROM-based subsystem includes an 802.11 a/b/g/n dual-band 2.4 GHz and 5 GHz radio, baseband, and MAC with powerful hardware cryptographic engine. With built-in security protocols, the CC3135MOD solution provides a robust and simple security experience. The CC3135MOD is available in an LGA package that is easy to lay out with all required components including serial Flash, RF filters, diplexer, crystal, and passive components that are fully integrated.
This generation introduces new capabilities that further simplify the connectivity of things to the Internet. The main new features of CC3135MOD include:
- 802.11 a/b/g/n: 2.4 GHz and 5 GHz support
- 2.4 GHz Coexistence with Bluetooth low energy radio
- Antenna diversity
- Enhanced security with FIPS 140-2 level 1 validated IC inside: certification
- More concurrent secure sockets, up to 16
- Unique device identifier with ability to generate certificate signing request (CSR)
- Online certificate status protocol (OCSP)
- Wi-Fi Alliance certified for IoT low power capabilities
- Hostless mode for offloading template packet transmissions
- Improved fast scan
The CC3135MOD device is part of the SimpleLink™ MCU platform—a common, easy-to-use development environment based on a single-core software development kit (SDK) with a rich tool set and reference designs. The E2E™ community supports Wi-Fi®, Bluetooth ® low energy, Sub-1 GHz, and host MCUs. For more information, visit www.ti.com/SimpleLink.
Technical documentation
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
BOOSTXL-CC3135 — SimpleLink™ Wi-Fi® CC3135 dual band wireless network processor BoosterPack™ plug-in module
CC31XXEMUBOOST — Advanced emulation kit for SimpleLink™ Wi-Fi® CC31xx BoosterPack™ plug-in module
This advanced emulation BoosterPack™ plug-in module is an accessory for the SimpleLink™ Wi-Fi® CC31xx wireless network processor BoosterPack plug-in modules
This accessory can be used for:
- Flashing updates to the CC31xxBOOST
- Using the CC3xxx radio tool for RF performance evaluation
- Using (...)
WIFISTARTERPRO — SimpleLink™ Wi-Fi® Starter Pro
Download on Google play
The SimpleLink™ Wi-Fi® Starter Pro mobile App is a new mobile application for SimpleLink provisioning. It goes along with the embedded provisioning library and example that runs on the device side. The new provisioning release is TI (...)
CC3XXXRADIOTEST — SimpleLink™ Wi-Fi® radio testing tool
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
SIMPLELINK-SDK-WIFI-PLUGIN — SimpleLink™ software development kit (SDK) Wi-Fi® plug-in
The SimpleLink SDK Wi-Fi Plug-in contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3120 or CC3135 Internet-on-a-chip™ solutions. This Plug-in is a companion software package that enables the use of a Wi-Fi radio on any standard (...)
Supported products & hardware
Products
Wi-Fi products
Arm Cortex-M4 MCUs
Low-power 2.4-GHz products
Hardware development
Evaluation board
Development kit
EMBEDDED-PROGRAMMING — SimpleLink™ Wi-Fi® Embedded Programming
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
Supported products & hardware
Products
C2000 real-time microcontrollers
Arm-based processors
Industrial mmWave radar sensors
Automotive mmWave radar sensors
MSP430 microcontrollers
Wi-Fi products
Arm Cortex-M4 MCUs
Arm Cortex-M0+ MCUs
Arm Cortex-R MCUs
Low-power 2.4-GHz products
Automotive wireless connectivity products
Sub-1 GHz wireless MCUs
SIMPLELINK-CC3XXX-CERTIFICATION — Radio certification for SimpleLink™ CC3XXX
SIMPLELINK-CC3XXX-REPORTS — Reports: CC3XXX Regulatory Certification
Are you looking for CC31XX or CC32XX certification support? SIMPLELINK-CC3XXX-CERTIFCATION provides the relevant information and support for successful certification of your product. Within this page you will find the latest certification reports of our Modules as well as our evaluation boards for (...)
Supported products & hardware
Products
Wi-Fi products
Hardware development
Evaluation board
Development kit
SIMPLELINK-WIFI-DESIGN-REVIEWS — Hardware design reviews for SimpleLink™ Wi-Fi devices
Package | Pins | CAD symbols, footprints & 3D models |
---|---|---|
QFM (MOB) | 63 | Ultra Librarian |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.