Home Interface Ethernet ICs Ethernet PHYs
Home
Interface
Ethernet ICs
Ethernet PHYs

DP83561-SP

ACTIVE

Space grade (QMLV-RHA) 10/100/1000 Ethernet PHY with SEFI monitoring suite

Order now
Data sheet

DP83561-SP

ACTIVE
Data sheet Order now

Product details

Datarate (Mbps) 10/100/1000 Interface type MII, RGMII Number of ports Single Rating Space Features QMLV-RHA compliant, Space Qualified I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -55 to 125 Number of LEDs 3 ESD HBM (kV) 8
Datarate (Mbps) 10/100/1000 Interface type MII, RGMII Number of ports Single Rating Space Features QMLV-RHA compliant, Space Qualified I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -55 to 125 Number of LEDs 3 ESD HBM (kV) 8
CFP (HBE) 64 118.81 mm² 10.9 x 10.9
  • QML Class V (QMLV), RHA, SMD 5962-20216
  • Military temperature range: –55°C to 125°C
  • Radiation performance
    • RHA up to TID = 300 krad (Si)
    • SEL immune to LET = 121 MeV·cm2/mg
  • Single Event Functional Interrupt (SEFI) monitor suite
    • Monitor
      • IEEE PCS state machine monitors
      • ECC configuration register monitor
      • PLL lock monitor
      • On-chip temperature monitor
    • Action
      • Interrupt pins to monitor events
    • Correction
      • ECC-protected configuration registers
      • Pin-configurable automatic SEFI recovery
      • Serial Management Interface (SMI) disable
  • Fully compatible to IEEE802.3 1000BASE-T, 100BASE-TX and 10BASE-Te specifications
  • Low RGMII latency (Tx < 90 ns, Rx < 290 ns)
  • Time sensitive network compliant
  • MAC interface: RGMII, MII
  • Integrated MDI termination resistors
  • Programmable RGMII termination impedance
  • Power supply: 2.5 V, 1.8 V, 1.1 V
  • I/O voltages: 1.8 V, 2.5 V, and 3.3 V
  • 25-MHz or 125-MHz synchronized clock output
  • Cable diagnostics: open, short using TDR
  • JTAG support
  • QML Class V (QMLV), RHA, SMD 5962-20216
  • Military temperature range: –55°C to 125°C
  • Radiation performance
    • RHA up to TID = 300 krad (Si)
    • SEL immune to LET = 121 MeV·cm2/mg
  • Single Event Functional Interrupt (SEFI) monitor suite
    • Monitor
      • IEEE PCS state machine monitors
      • ECC configuration register monitor
      • PLL lock monitor
      • On-chip temperature monitor
    • Action
      • Interrupt pins to monitor events
    • Correction
      • ECC-protected configuration registers
      • Pin-configurable automatic SEFI recovery
      • Serial Management Interface (SMI) disable
  • Fully compatible to IEEE802.3 1000BASE-T, 100BASE-TX and 10BASE-Te specifications
  • Low RGMII latency (Tx < 90 ns, Rx < 290 ns)
  • Time sensitive network compliant
  • MAC interface: RGMII, MII
  • Integrated MDI termination resistors
  • Programmable RGMII termination impedance
  • Power supply: 2.5 V, 1.8 V, 1.1 V
  • I/O voltages: 1.8 V, 2.5 V, and 3.3 V
  • 25-MHz or 125-MHz synchronized clock output
  • Cable diagnostics: open, short using TDR
  • JTAG support

The DP83561-SP is a high reliability gigabit ethernet PHY designed for the high-radiation environment of space. The DP83561-SP is a low power, fully featured physical layer transceiver with integrated PMD sub-layers to support 10BASE-Te, 100BASE-TX and 1000BASE-T Ethernet protocols.

The DP83561-SP is designed for easy implementation of 10/100/1000 Mbps Ethernet LANs in extremely hostile environments. It interfaces directly to twisted pair media through an external transformer. This device interfaces directly to the MAC layer through Reduced GMII (RGMII) and MII.

The device is Radiation Hardened by Design (RHBD), fabricated by Texas Instruments using a CMOS process, and is available in 64-pin Ceramic Quad Flat Pack (CQFP) package, with a 11-mm × 11-mm body size (nominal).

The DP83561-SP is a high reliability gigabit ethernet PHY designed for the high-radiation environment of space. The DP83561-SP is a low power, fully featured physical layer transceiver with integrated PMD sub-layers to support 10BASE-Te, 100BASE-TX and 1000BASE-T Ethernet protocols.

The DP83561-SP is designed for easy implementation of 10/100/1000 Mbps Ethernet LANs in extremely hostile environments. It interfaces directly to twisted pair media through an external transformer. This device interfaces directly to the MAC layer through Reduced GMII (RGMII) and MII.

The device is Radiation Hardened by Design (RHBD), fabricated by Texas Instruments using a CMOS process, and is available in 64-pin Ceramic Quad Flat Pack (CQFP) package, with a 11-mm × 11-mm body size (nominal).
filter Find other Ethernet PHYs
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Similar functionality to the compared device
DP83848-EP ACTIVE Enhanced Product PHYTER extreme temperature single port 10/100 Mb/s Ethernet physical layer EP qualified device that supports 10/100M

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 10
Type Title Date
* Data sheet DP83561-SP Radiation-Hardness-Assured (RHA), 10/100/1000 Ethernet PHY Transceiver with SEFI Handling Sub-System datasheet (Rev. B) PDF | HTML 12 Nov 2021
* Radiation & reliability report DP83561-SP Radiation-Hardness-Assured (RHA), 10/100/1000 Ethernet 14 Jun 2022
* Radiation & reliability report DP83561-SP Single Event Effects (SEE) Radiation Report 09 May 2022
Application brief DLA Approved Optimizations for QML Products (Rev. A) PDF | HTML 05 Jun 2024
Selection guide TI Space Products (Rev. J) 12 Feb 2024
More literature TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. A) 31 Aug 2023
Application note Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. A) PDF | HTML 17 Nov 2022
Application note Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 19 Oct 2022
Application note How to Pass IEEE Ethernet Compliance Tests PDF | HTML 20 Sep 2021
EVM User's guide DP83561EVM User Guide PDF | HTML 19 Apr 2021

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DP83561EVM — Space qualified (QMLV-RHA compliant) 10/100/1000 Ethernet PHY evaluation module

The DP83561-EVM is an evaluation board designed to demonstrate the performance and unique features of the DP83561-SP Space-grade ethernet physical layer transceiver.
User guide: PDF | HTML
Not available on TI.com
Driver or library

ETHERNET-SW — Ethernet PHY Linux drivers & tools

The Linux drivers for Texas Instruments' Ethernet physical layer (PHY) transceivers support communication through the serial management interface (MDC/MDIO) to configure and read PHY registers.

The USB-2-MDIO software lets you directly access the registers during debug and (...)

View Options
Support software

USB-2-MDIO — USB-2-MDIO Tool v1.0

The USB-2-MDIO software tool lets Texas Instruments' Ethernet PHYs access the MDIO status and device control registers.  The USB-2-MDIO tool includes a LaunchPad™ Development kit for TI's MSP430™ MCUs that is interfaced with a lightweight GUI.  The (...)

Supported products & hardware

Supported products & hardware

Products
Ethernet PHYs
DP83561-SP — Space grade (QMLV-RHA) 10/100/1000 Ethernet PHY with SEFI monitoring suite DP83620 — Industrial temperature, 10/100-Mbps Ethernet PHY transceiver with JTAG & fiber support DP83630 — IEEE 1588 precision-time protocol (PTP) Ethernet PHY transceiver with smaller form factor DP83640 — IEEE 1588 precision-time protocol (PTP) Ethernet PHY transceiver DP83815 — 10/100 Mbps integrated PCI Ethernet media access controller & physical layer (MacPhyter) DP83816 — 10/100 Mbps integrated PCI Ethernet media access controller & physical layer (MacPhyter-II) DP83816EX — 10/100 Mbps integrated PCI Ethernet media access controller & physical layer (MacPhyter-II) extend DP83822H — Extended temperature, robust low-power 10/100-Mbps Ethernet PHY transceiver with 16-kV ESD DP83822HF — Extended temperature, robust 10/100-Mbps Ethernet PHY transceiver with fiber support & 16-kV ESD DP83822I — Low-power, robust 10/100-Mbps Ethernet PHY transceiver with 16-kV ESD DP83822IF — Low-power, robust 10/100-Mbps Ethernet PHY transceiver with fiber support & 16-kV ESD DP83825I — Smallest form factor (3-mm by 3-mm), low-power 10/100-Mbps Ethernet PHY transceiver with 50-MHz c DP83826E — Low latency 10/100-Mbps PHY with MII interface and enhanced mode DP83826I — Low latency 10/100-Mbps PHY, MII interface and enhanced mode with an industrial temperature range DP83843 — 10/100-Mbps Ethernet PHY transceiver with fiber & AUI support DP83846A — Single 10/100 DsPHYTER Ethernet physical layer transceiver DP83847 — 10/100-Mbps Ethernet PHY transceiver with 5-V tolerant I/Os DP83848-EP — Enhanced Product PHYTER extreme temperature single port 10/100 Mb/s Ethernet physical layer DP83848-HT — High Temperature PHYTER single port 10/100 Mb/s Ethernet physical layer DP83848C — Commercial temperature, 10/100-Mbps Ethernet PHY transceiver with SNI interface & JTAG support DP83848H — Extended temperature, 10/100-Mbps Ethernet PHY transceiver in a 40-pin QFN package DP83848I — Industrial temperature, 10/100-Mbps Ethernet PHY transceiver with SNI & JTAG support DP83848J — Commercial temperature, 10/100-Mbps Ethernet PHY transceiver in a 40-pin QFN package DP83848K — Industrial temperature, 10/100-Mbps Ethernet PHY transceiver in a 40-pin QFN package DP83848M — Commercial temperature, 10/100-Mbps Ethernet PHY transceiver with 25-MHz clock out DP83848Q-Q1 — Automotive Grade 2, 10/100-Mbps Ethernet PHY transceiver DP83848T — Industrial temperature, 10/100-Mbps Ethernet PHY transceiver with 25-MHz clock out DP83848VYB — High-temperature, low-power 10/100-Mbps Ethernet PHY Transceiver with JTAG support DP83848YB — Extended temperature, 10/100-Mbps Ethernet PHY transceiver with JTAG support DP83849C — Commercial temperature, dual-port 10/100-Mbps Ethernet PHY transceiver DP83849I — Industrial temperature, dual-port 10/100-Mbps Ethernet PHY transceiver with flexible port switchi DP83849ID — Industrial temperature, dual-port 10/100-Mbps Ethernet PHY transceiver with fiber support DP83849IF — Industrial temperature, dual-port 10/100-Mbps Ethernet PHY transceiver with fiber support & flexible DP83865 — Gigabit 10/100/1000 PHYTER V Ethernet physical layer transceiver DP83867CR — Low-power, robust gigabit Ethernet PHY transceiver in a small QFN package DP83867CS — Low-power, robust gigabit Ethernet PHY transceiver with SGMII DP83867E — Extended temperature, robust low-latency gigabit Ethernet PHY transceiver with SGMII DP83867IR — Industrial temperature, robust gigabit Ethernet PHY transceiver DP83867IS — Industrial temperature, robust gigabit Ethernet PHY transceiver with SGMII DP83869HM — Extended temperature, high-immunity gigabit Ethernet PHY transceiver with copper & fiber interface DP83910A — CMOS serial network interface (SNI) DP83TC811R-Q1 — Low-power 100BASE-T1 automotive PHYTER™ Ethernet physical layer transceiver DP83TC811S-Q1 — Automotive Grade 1 low-power 100BASE-T1 Ethernet PHY transceiver with xMII support & dia DP83TC812R-Q1 — TC-10 compliant 100BASE-T1 automotive Ethernet PHY with RGMII DP83TC812S-Q1 — TC-10 compliant 100BASE-T1 automotive Ethernet PHY with RGMII & SGMII DP83TC813R-Q1 — Automotive Low-Power, Small Footprint 100BASE-T1 Ethernet PHY DP83TC813S-Q1 — Automotive Low-Power, Small Footprint 100BASE-T1 Ethernet PHY (SGMII) DP83TC814R-Q1 — Low-power 100BASE-T1 automotive Ethernet PHY without TC10 DP83TC814S-Q1 — Low-power 100BASE-T1 automotive Ethernet PHY without TC10 (SGMII) DP83TD510E — IEEE 802.3cg 10BASE-T1L Ethernet PHY DP83TG720R-Q1 — 1000BASE-T1 automotive Ethernet PHY with RGMII DP83TG720S-Q1 — 1000BASE-T1 automotive Ethernet PHY with RGMII & SGMII TLK100 — Industrial Ethernet PHY TLK105L — Industrial temperature, single port 10/100-Mbps Ethernet physical layer TLK106 — Industrial temperature, single port 10/100-Mbps Ethernet physical layer transceiver TLK106L — Industrial temperature, single port 10/100-Mbps Ethernet physical layer TLK110 — Industrial 10/100 Ethernet PHY TLK111 — Industrial temperature 10/100-Mbps Ethernet physical layer transceiver
Hardware development
Evaluation board
DP83867ERGZ-S-EVM — DP83867ERGZ SGMII 1000M/100M/10M Ethernet PHY Evaluation Module
Development kit
MSP-EXP430F5529LP — MSP430F5529 LaunchPad™ development kit for USB
Software
Driver or library
ETHERNET-SW — Ethernet PHY Linux drivers & tools
Download
Simulation model

DP83561-SP IBIS Model

SNLM248.ZIP (727 KB) - IBIS Model
Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
View Options
Package Pins CAD symbols, footprints & 3D models
CFP (HBE) 64 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos