LM2940-N

ACTIVE

1-A, 26-V, high-PSRR, low-dropout voltage regulator

Product details

Output options Fixed Output Iout (max) (A) 1 Vin (max) (V) 26 Vin (min) (V) 6 Vout (max) (V) 15 Vout (min) (V) 5 Fixed output options (V) 5, 8, 9, 10, 12, 15 Rating Catalog Noise (µVrms) 150 PSRR at 100 KHz (dB) 48 Iq (typ) (mA) 10 Thermal resistance θJA (°C/W) 23, 41, 59 Load capacitance (min) (µF) 22 Regulated outputs (#) 1 Accuracy (%) 2 Dropout voltage (Vdo) (typ) (mV) 500 Operating temperature range (°C) -40 to 125
Output options Fixed Output Iout (max) (A) 1 Vin (max) (V) 26 Vin (min) (V) 6 Vout (max) (V) 15 Vout (min) (V) 5 Fixed output options (V) 5, 8, 9, 10, 12, 15 Rating Catalog Noise (µVrms) 150 PSRR at 100 KHz (dB) 48 Iq (typ) (mA) 10 Thermal resistance θJA (°C/W) 23, 41, 59 Load capacitance (min) (µF) 22 Regulated outputs (#) 1 Accuracy (%) 2 Dropout voltage (Vdo) (typ) (mV) 500 Operating temperature range (°C) -40 to 125
SOT-223 (DCY) 4 45.5 mm² 6.5 x 7 TO-220 (NDE) 3 46.5328 mm² 10.16 x 4.58 TO-220 (NEB) 3 46.4312 mm² 10.16 x 4.57 TO-263 (KTT) 3 154.8384 mm² 10.16 x 15.24 WSON (NGN) 8 16 mm² 4 x 4
  • Input Voltage Range = 6 V to 26 V
  • Dropout Voltage Typically 0.5 V at IOUT = 1 A
  • Output Current in Excess of 1 A
  • Output Voltage Trimmed Before Assembly
  • Reverse Battery Protection
  • Internal Short Circuit Current Limit
  • Mirror Image Insertion Protection
  • P+ Product Enhancement Tested
  • Input Voltage Range = 6 V to 26 V
  • Dropout Voltage Typically 0.5 V at IOUT = 1 A
  • Output Current in Excess of 1 A
  • Output Voltage Trimmed Before Assembly
  • Reverse Battery Protection
  • Internal Short Circuit Current Limit
  • Mirror Image Insertion Protection
  • P+ Product Enhancement Tested

The LM2940-N and LM2940C positive voltage regulators feature the ability to source 1 A of output current with a dropout voltage of typically 0.5 V and a maximum of 1 V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3 V. The quiescent current with 1 A of output current and an input-output differential of 5 V is therefore only 30 mA. Higher quiescent currents only exist when the regulator is in the dropout mode (VIN − VOUT ≤ 3 V).

Designed also for vehicular applications, the LM2940-N and LM2940C and all regulated circuitry are protected from reverse battery installations or 2-battery jumps. During line transients, such as load dump when the input voltage can momentarily exceed the specified maximum operating voltage, the regulator will automatically shut down to protect both the internal circuits and the load. The LM2940-N and LM2940C cannot be harmed by temporary mirror-image insertion. Familiar regulator features such as short circuit and thermal overload protection are also provided.

The LM2940-N and LM2940C positive voltage regulators feature the ability to source 1 A of output current with a dropout voltage of typically 0.5 V and a maximum of 1 V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3 V. The quiescent current with 1 A of output current and an input-output differential of 5 V is therefore only 30 mA. Higher quiescent currents only exist when the regulator is in the dropout mode (VIN − VOUT ≤ 3 V).

Designed also for vehicular applications, the LM2940-N and LM2940C and all regulated circuitry are protected from reverse battery installations or 2-battery jumps. During line transients, such as load dump when the input voltage can momentarily exceed the specified maximum operating voltage, the regulator will automatically shut down to protect both the internal circuits and the load. The LM2940-N and LM2940C cannot be harmed by temporary mirror-image insertion. Familiar regulator features such as short circuit and thermal overload protection are also provided.

Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
TPS7A47 ACTIVE 1-A, 36-V, low-noise, high-PSRR, low-dropout voltage regulator with enable Similar device with lower IQ

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Data sheet LM2940x 1-A Low Dropout Regulator datasheet (Rev. J) PDF | HTML 22 Dec 2014
Selection guide Low Dropout Regulators Quick Reference Guide (Rev. P) 21 Mar 2018
Application note Linear power for automated industrial systems 09 Jan 2015
More literature Die D/S LM2940-5.0 MD8 1A Low Dropout Adjustable Regulator 20 Dec 2012
Application note Linear and Switching Voltage Regulator Fundamental Part 1 21 Mar 2007

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DLPDLCR4710EVM-G2 — Full HD DLP4710 Chipset Evaluation Module

DLP® LightCrafter Display 4710 EVM-G2 is an easy to use, plug and play evaluation platform for the Full HD DLP4710 chipset. The DLP4710 chipset is designed to be used in a wide array of display applications like mobile projectors, screenless TVs, interactive displays and digital signage. The (...)
User guide: PDF
Evaluation board

LMG34XX-BB-EVM — LMG34xx GaN system-level evaluation motherboard for LMG341x Family

The LMG34XX-BB-EVM is an easy to use breakout board to configure any LMG341x half bridge board, such as the LMG3410-HB-EVM, as a synchronous buck converter. By providing a power stage, bias power and logic circuitry this EVM allows for quick measurements of the GaN device switching. This EVM is (...)

User guide: PDF
Not available on TI.com
Evaluation board

TPA3251EVM — TPA3251 175W Stereo / 350W Mono Ultra-HD, Analog-In Class-D Module

The TPA3251EVM Ultra-HD evaluation module demonstrates the TPA3251 integrated circuit from Texas Instruments. The TPA3251 is a high-performance Class-D amplifier that enables true premium sound quality with high efficiency Class-D technology. It features an advanced integrated feedback design and (...)

User guide: PDF
Not available on TI.com
Simulation model

LM2940 5.0V TINA-TI Transient Spice Model

SBVM448.ZIP (8 KB) - TINA-TI Spice Model
Simulation model

LM2940-N 10.0V PSPice Transient Model

SLVMAN7.ZIP (33 KB) - PSpice Model
Simulation model

LM2940-N 10.0V TINA-TI Reference Design

SLVMAO4.TSC (92 KB) - TINA-TI Reference Design
Simulation model

LM2940-N 10.0V TINA-TI Transient Model

SLVMAO5.ZIP (8 KB) - TINA-TI Spice Model
Simulation model

LM2940-N 10.0V Unencrypted PSpice Transient Model

SNVMA77.ZIP (1 KB) - PSpice Model
Simulation model

LM2940-N 12.0V PSPice Transient Model

SLVMAN6.ZIP (33 KB) - PSpice Model
Simulation model

LM2940-N 12.0V TINA-TI Reference Design

SLVMAO3.TSC (93 KB) - TINA-TI Reference Design
Simulation model

LM2940-N 12.0V TINA-TI Transient Model

SLVMAO2.ZIP (8 KB) - TINA-TI Spice Model
Simulation model

LM2940-N 12.0V Unencrypted PSpice Transient Model

SNVMA78.ZIP (1 KB) - PSpice Model
Simulation model

LM2940-N 15.0V PSpice Transient Model

SNVM817.ZIP (34 KB) - PSpice Model
Simulation model

LM2940-N 15.0V Unencrypted PSpice Transient Model

SNVMA75.ZIP (1 KB) - PSpice Model
Simulation model

LM2940-N 5.0V PSPice Transient Model

SLVMAN3.ZIP (41 KB) - PSpice Model
Simulation model

LM2940-N 5.0V TINA-TI Reference Design

SBVM449.TSC (101 KB) - TINA-TI Reference Design
Simulation model

LM2940-N 5.0V Unencrypted PSpice Transient Model

SNVMA79.ZIP (1 KB) - PSpice Model
Simulation model

LM2940-N 8.0V PSPice Transient Model

SLVMAN4.ZIP (31 KB) - PSpice Model
Simulation model

LM2940-N 8.0V TINA-TI Reference Design

SLVMAN9.TSC (94 KB) - TINA-TI Reference Design
Simulation model

LM2940-N 8.0V TINA-TI Transient Model

SLVMAN8.ZIP (8 KB) - TINA-TI Spice Model
Simulation model

LM2940-N 8.0V Unencrypted PSpice Transient Model

SNVMA80.ZIP (1 KB) - PSpice Model
Simulation model

LM2940-N 9.0V PSPice Transient Model

SLVMAN5.ZIP (31 KB) - PSpice Model
Simulation model

LM2940-N 9.0V TINA-TI Reference Design

SLVMAO0.TSC (95 KB) - TINA-TI Reference Design
Simulation model

LM2940-N 9.0V TINA-TI Transient Model

SLVMAO1.ZIP (8 KB) - TINA-TI Spice Model
Simulation model

LM2940-N 9.0V Unencrypted PSpice Transient Model

SNVMA76.ZIP (1 KB) - PSpice Model
Reference designs

TIDA-00874 — High Fidelity 175-W Class-D Audio Amplifier with Digital Inputs and Processing Reference Design

This design turns the extremely high performance analog input TPA3251 Class-D amplifier into a digital input system with audio processing using the highly versatile PCM5242 differential output DAC. Now the full performance of TPA3251 amplifier can be realized with a variety of digital input (...)
Test report: PDF
Schematic: PDF
Reference designs

TIDM-1003 — Low Voltage, 50A Sensorless FOC Reference Design for PM or BLDC Motors

The design is a 30V to 54 V Brushless DC motor (BLDC) or Permanent-magnet Synchronous Motors (PMSM) controller for low voltage, high current, high power ebike, power tool, fan, and pump applications. The design uses the Texas Instruments UCC27211D MOSFET drivers, CSD19506KCS 80V NexFET™ power (...)
Design guide: PDF
Schematic: PDF
Reference designs

TIDA-01226 — Compact Full HD 1080p (up to 16 Amps) Projection Display Reference Design Using DLP Pico Technology

This reference design, featuring the DLP Pico™ 0.47-inch TRP Full-HD 1080p display chipset and implemented in the DLP LightCrafter Display 4710 G2 evaluation module (EVM), enables use of full HD resolution for projection display applications such as accessory projectors, screenless displays, (...)
Design guide: PDF
Schematic: PDF
Package Pins CAD symbols, footprints & 3D models
SOT-223 (DCY) 4 Ultra Librarian
TO-220 (NDE) 3 Ultra Librarian
TO-220 (NEB) 3 Ultra Librarian
TO-263 (KTT) 3 Ultra Librarian
WSON (NGN) 8 Ultra Librarian

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos