Calculation tool
TPS25940-Q1
2.7-V to 18-V, 42mΩ, 0.6-5.3A automotive eFuse with current monitor and short to battery protection
Data sheet
TPS25940-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C5
- 2.7-V to 18-V operating voltage, 20 V (maximum)
- Total RON: 42 mΩ (typical)
- 0.6-A to 5.3-A adjustable current limit (±8%)
- IMON Current indicator output
- ±8% accuracy for TPS25940-Q1/TPS25940L-Q1
- Adjustable under-, overvoltage threshold (±2%)
- Reverse current blocking
- 1-µs reverse voltage shutoff
- Programmable dVo/dt control
- Power good and fault outputs
- Short-to-battery protection
- Short-to-ground protection
- TPS25940-Q1/TPS259401A-Q1: auto-retry
- TPS25940L-Q1: latch-off
The TPS25940xx-Q1 eFuse Power Switches are compact, feature rich power management devices with a full suite of protection functions. The wide operating range allows control of many popular DC bus voltages. Integrated back-to-back FETs provide bidirectional current control making the device well suited for systems with load side holdup energy that must not drain back to a failed supply bus.
Load, source and device protection are provided with many programmable features including overcurrent, dVo/dt ramp and overvoltage, undervoltage thresholds. For system status monitoring and downstream load control, the device provides PGOOD, FLT and precise current monitor output. Precise programmable undervoltage, overvoltage thresholds and mode simplify power management design.
The TPS25940xx-Q1 monitor V(IN) and V(OUT) to provide true reverse current blocking when V(IN) < (V(OUT) – 66 mV). This function supports supply bus protection from over-voltages during output short to battery faults.
Technical documentation
No results found. Please clear your search and try again.
View all 7 | Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | TPS25940xx-Q1 2.7-V to 18-V eFuse with Integrated Short-to-Battery Protection datasheet (Rev. E) | PDF | HTML | 29 Jan 2021 |
| Functional safety information | eFuse: Safety Certification and why it Matters | 18 Mar 2020 | ||
| E-book | 11 Ways to Protect Your Power Path | 03 Jul 2019 | ||
| EVM User's guide | TPS25940 Evaluation Module User's Guide (Rev. B) | 09 Jul 2018 | ||
| Application note | Basics of eFuses (Rev. A) | 05 Apr 2018 | ||
| Application note | Charging Super Capacitor With eFuse | 08 Aug 2017 | ||
| Application note | Power Multiplexing Using Load Switches and eFuses (Rev. A) | 20 Jun 2017 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
TPS25940EVM-635 — TPS25940x Evaluation Module
The TPS25940XEVM-635 is an eFuse (Current Limiter with DEVSLP) that operates from 2.7V to 18V, and have integrated back-to-back FETs with programmable under-voltage, over-voltage, reverse-voltage, over-current and in-rush current protection. It also includes analog current monitoring in a small (...)
User guide: PDF
Simulation model
TPS25940-Q1 Unencrypted PSpice Transient Model Package (Rev. B)
SLVMBN6B.ZIP (78 KB) - PSpice Model
Calculation tool
TVS-RECOMMENDATION-CALC — TVS diode recommendation tool
This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
Supported products & hardware
This design resource supports most products in these categories.
Check the product details page to verify support.
-
parametric-filter eFuses & hot swap controllers
Simulation tool
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Reference designs
TIDA-01413 — ADAS 8-Channel Sensor Fusion Hub Reference Design with Two 4-Gbps Quad Deserializers
This sensor fusion hub reference design allows the connection of up to four 2-megapixel cameras and up to four radar modules over coaxial cable. This design utilizes these coaxial cables to provide power, backchannel communication, and clock synchronization to the sensors. The two 4 Gbps FPD-Link (...)
Reference designs
TIDA-01514 — Protection and Light-Load Detection Reference Design for Antenna Modules
The TIDA-01514 reference design provides protection and diagnostics for antenna modules for use in automotive infotainment and navigation systems. This design is an alternate solution for antenna low-dropout linear regulators (LDOs) for the purpose of achieving lower ohmic drop (IR) while meeting (...)
Reference designs
PMP30046 — Enterprise SSD Backup Power Reference Design
The PMP30046 reference design shows a system solution for an enterprise SSD backup power supply. The input voltage of the hotswap controller can be either 5V or 12V. A buck stage converts this input voltage to 3.3V with a maximum load current of 2.5A. The 3.3V are boosted to 28V for charging a (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| WQFN (RVC) | 20 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.