Calculation tool
TPS54J061
4-V to 16-V input, 6-A synchronous buck converter, 600-mV reference voltage and hiccup current limit
Data sheet
TPS54J061
- 2.7V to 16V input range with external bias ranging from 3.3V to 3.6V
- 4V to 16V input range without external bias
- Integrated MOSFETs support 6A continuous output current
- D-CAP3™ control mode with fast load-step response
- Supports all ceramic output capacitors
- Reference voltage 600mV ±1% tolerance from –40°C to +125°C junction temperature
- 0.6V to 5.5V output voltage range
- Auto-skipping Eco-mode for high light-load efficiency
- Programmable current limit through external resistor
- Selectable frequency settings (600kHz, 1100kHz, 2200kHz)
- Internal fixed, external adjustable soft start
- Safe prebiased start-up capability
- Built-in circuit allows slow output discharge
- Open-drain power-good output
- Self restarting hiccup mode for OC, UV faults
- Fully RoHS compliant
- 2mm × 3mm, 14-pin HotRod™ package with 0.5mm pitch
The TPS54J061 device is a high-efficiency, small-sized, synchronous buck converter with an adaptive on-time D-CAP3 control mode . The device offers ease-of-use and low external-component count for space-conscious power systems.
This device features high-performance integrated MOSFETs, accurate ±1% 600mV reference with an junction temperature range between –40°C and +125°C. Competitive features include very-low external-component count, fast load-transient response, accurate load regulation and line regulation, auto-skip or FCCM mode operation, adjustable soft-start control, and external compensation is not needed to support all ceramic capacitor design .
TPS54J061 is available in a 14-pin QFN package.
Technical documentation
No results found. Please clear your search and try again.
View all 8 | Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | TPS54J061 4VIN to 16VIN , 6A, Synchronous Step-Down Converter With D-CAP3™ Control Mode and 0.6V Reference datasheet (Rev. B) | PDF | HTML | 07 Jun 2024 |
| Application note | Point-of-Load Designs in Data Center Apps for Intel Xeon Sapphire Rapids Scalabl (Rev. B) | PDF | HTML | 29 Aug 2023 | |
| Application note | Measuring the Bode Plot of D-CAP™, D-CAP2™, and D-CAP3™ DC/DC Converters (Rev. A) | PDF | HTML | 21 Apr 2023 | |
| Application note | 6-A DC/DC Buck Converter Selection Guide of Mid-range VIN | PDF | HTML | 18 Apr 2023 | |
| Application note | Point-of-Load Solutions for Network Interface Cards (NIC) | PDF | HTML | 08 Sep 2021 | |
| EVM User's guide | TPS54J06x Step-Down Converter Evaluation Module User's Guide (Rev. B) | PDF | HTML | 07 May 2021 | |
| Certificate | TPS54J061EVM-067 EU Declaration of Conformity (DoC) | 18 Sep 2020 | ||
| Application note | Point-of-Load Solutions for Data Center App Implementing VR13.HC Vccin Spec (Rev. A) | PDF | HTML | 08 Jan 2020 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
TPS54J061EVM — 2.7-V to 16-V, 6-A, step-down converter evaluation board
The TPS54J061EVM-067 is an evaluation module (EVM) for the TPS54J061. The TPS54J061 is a synchronous buck converter, integrating both power MOSFETs to minimize solution size and provide high efficiency at full load. The TPS54J061 uses DCAP3 control to achieve fast transient response to a load (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| VQFN-HR (RPG) | 14 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.