TPS62902

Name: TPS62902
Brand: TI
SKU: TPS62902
Price: 0.45 USD

ACTIVE

3-V to 17-V, 2-A high-efficiency low-IQ buck converter in 1.5-mm × 2-mm QFN package

Order now

Data sheet

document-pdfAcrobat TPS62902, 3-V to 17-V, High Efficiency and Low IQBuck Converter in 1.5-mm × 2-mm QFN Package datasheet (Rev. A) PDF | HTML

TPS62902

ACTIVE

Data sheet

Order now

Product details

Rating

Catalog

Operating temperature range (°C)

-40 to 165

Topology

Buck

Type

Converter

Iout (max) (A)

2

Vin (min) (V)

3

Vin (max) (V)

17

Switching frequency (min) (kHz)

1000

Switching frequency (max) (kHz)

2500

Features

Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable

Control mode

DCS-Control

Vout (min) (V)

0.4

Vout (max) (V)

5.5

Iq (typ) (µA)

4

Duty cycle (max) (%)

100

Rating

Catalog

Operating temperature range (°C)

-40 to 165

Topology

Buck

Type

Converter

Iout (max) (A)

2

Vin (min) (V)

3

Vin (max) (V)

17

Switching frequency (min) (kHz)

1000

Switching frequency (max) (kHz)

2500

Features

Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable

Control mode

DCS-Control

Vout (min) (V)

0.4

Vout (max) (V)

5.5

Iq (typ) (µA)

4

Duty cycle (max) (%)

100

VQFN-HR (RPJ)

9

3 mm² 2 x 1.5

High efficiency for wide duty cycle and load range
- I Q: 4 µA typical
- Selectable switching frequency of 2.5 MHz and 1.0 MHz
- R DS(ON): 62-mΩ high side, 22-mΩ low side
- Automatic efficiency enhancement (AEE)
Small 1.5-mm × 2.0-mm VQFN package with 0.5-mm pitch
Up to 2-A continuous output current
±0.9% feedback voltage accuracy across temp (-40°C to 150°C)
Configurable ouput voltage options:
- V FB external divider: 0.6 V to 5.5 V
- V SET internal divider: 16 options between 0.4 V and 5.5 V
DCS-Control™ topology with 100% mode
Highly flexible and easy to use
- Optimized pinout for single-layer routing
- Precise enable input
- Forced PWM or auto power save mode
- Power good output
- Selectable active output discharge
- Adjustable soft start and tracking
No external bootstrap capacitor required
Create a custom design using the TPS62902 using the WEBENCH Power Designer

High efficiency for wide duty cycle and load range
- I Q: 4 µA typical
- Selectable switching frequency of 2.5 MHz and 1.0 MHz
- R DS(ON): 62-mΩ high side, 22-mΩ low side
- Automatic efficiency enhancement (AEE)
Small 1.5-mm × 2.0-mm VQFN package with 0.5-mm pitch
Up to 2-A continuous output current
±0.9% feedback voltage accuracy across temp (-40°C to 150°C)
Configurable ouput voltage options:
- V FB external divider: 0.6 V to 5.5 V
- V SET internal divider: 16 options between 0.4 V and 5.5 V
DCS-Control™ topology with 100% mode
Highly flexible and easy to use
- Optimized pinout for single-layer routing
- Precise enable input
- Forced PWM or auto power save mode
- Power good output
- Selectable active output discharge
- Adjustable soft start and tracking
No external bootstrap capacitor required
Create a custom design using the TPS62902 using the WEBENCH Power Designer

The TPS62902 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5 MHz or 1.0 MHz allows the use of small inductors and provides fast transient response. The device supports high V OUT accuracy of ± 1% with DCS-Control topology. The wide input voltage range of 3-V to 17-V supports a variety of nominal inputs, like 12-V supply rails, single-cell or multi-cell Li-Ion, and 5-V or 3.3-V rails.

The TPS62902 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4 µA. AEE, if enabled, provides high efficiency across V IN, V OUT, and load current. The device includes a S-CONF/MODE input to set the internal/external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 9-pin VQFN package measuring 1.50 mm × 2.00 mm with 0.5-mm pitch.

The TPS62902 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5 MHz or 1.0 MHz allows the use of small inductors and provides fast transient response. The device supports high V OUT accuracy of ± 1% with DCS-Control topology. The wide input voltage range of 3-V to 17-V supports a variety of nominal inputs, like 12-V supply rails, single-cell or multi-cell Li-Ion, and 5-V or 3.3-V rails.

The TPS62902 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4 µA. AEE, if enabled, provides high efficiency across V IN, V OUT, and load current. The device includes a S-CONF/MODE input to set the internal/external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 9-pin VQFN package measuring 1.50 mm × 2.00 mm with 0.5-mm pitch.

filter

Find other AC/DC & DC/DC converters (integrated FET)

Download View video with transcript Video

Similar products you might be interested in

open-in-new

Compare alternates

Drop-in replacement with upgraded functionality to the compared device

TPS62901

ACTIVE

3-V to 17-V, 1-A high-efficiency low-IQ buck converter in 1.5-mm × 2-mm QFN package Pin-to-pin 1-A output current

TPS62903

ACTIVE

3-V to 17-V, 3-A high-efficiency low-IQ buck converter in 1.5-mm × 2-mm QFN package Pin-to-pin 3-A output current

Technical documentation

star

=Top documentation for this product selected by TI

No results found. Please clear your search and try again.

View all 6

	Type	Title		Date
*	Data sheet	TPS62902, 3-V to 17-V, High Efficiency and Low IQBuck Converter in 1.5-mm × 2-mm QFN Package datasheet (Rev. A)	PDF \| HTML	06 Nov 2023
	Application note	How to Best Use TPS62903 for a Given Application Requirement	PDF \| HTML	13 Aug 2021
	Application note	Comparison of TPS6290x vs. TPS621x0	PDF \| HTML	23 Jul 2021
	Application brief	Multi-Function Pins for Easy Designing	PDF \| HTML	07 Jul 2021
	EVM User's guide	TPS6290x Step-Down Converter Evaluation Module User's Guide (Rev. A)	PDF \| HTML	07 May 2021
	Certificate	TPS62902EVM-069 EU RoHS Declaration of Conformity (DoC)		15 Dec 2020

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS62902EVM-069 — 17-VIN, 2-A, low IQ buck converter in 1.5-mm x 2-mm QFN package evaluation module

The TPS62902EVM-069 (BSR069-002) evaluation module (EVM) facilitates the evaluation of the TPS62902 2-A buck converter in small 1.5-mm by 2-mm QFN package. The EVM outputs a 1.8-V output voltage from input voltages between 3 V and 17 V. The TPS62902 is a high-efficiency, low I_Q buck converter for (...)

User guide: PDF | HTML