Calculation tool
TPS7H4001-SP
Radiation-hardened, QMLV and QMLP, 3-V to 7-V input 18-A synchronous step-down converter
Data sheet
TPS7H4001-SP
- Radiation performance:
- Radiation-hardness-assured up to TID 100 krad(Si)
- SEL, SEB, and SEGR immune to LET = 75 MeV-cm 2/mg
- SET and SEFI characterized up to LET = 75 MeV-cm 2/mg
- Peak efficiency: 95.5% (V O = 1 V at 100 kHz)
- Power rail: 3 V to 7 V on VIN
- Flexible switching frequency options:
- 100-kHz to 1-MHz adjustable internal oscillator
- External sync capability: 100-kHz to 1-MHz
- SYNC pins can be configured as 500-kHz clocks at 90° out of phase to parallel up to 4 devices
- 0.6-V ±1.5% voltage reference over temperature, radiation, and line and load regulation for CDFP, KGD (known good die), and HTSSOP (QMLP) options
- 0.6-V ±1.7% voltage reference over temperature, radiation, and line and load regulation for HTSSOP (SHP) option
- Monotonic start-up into prebiased outputs
- Adjustable slope compensation and soft-start
- Adjustable input enable and power-good output for power sequencing
The TPS7H4001-SP is a radiation-hardness-assured, 7-V, 18-A synchronous buck converter with integrated low-resistance high-side and low-side MOSFETs. High efficiency and reduced component count are achieved through current mode control.
The output voltage start-up ramp is controlled by the SS/TR pin which allows operation as either a stand alone power supply or in tracking situations. Power sequencing is possible by correctly configuring the enable and the power good pins. The TPS7H4001-SP can be configured in primary-secondary mode and with the SYNC2 pin, four devices can be configured in parallel without an external clock.
Cycle-by-cycle current limiting on the high-side FET protects the device in overload situations and is enhanced by a low-side sourcing current protection which prevents current runaway. Thermal shutdown disables the part when die temperature exceeds thermal limit.
Similar products you might be interested in
Similar functionality to the compared device
Technical documentation
No results found. Please clear your search and try again.
View all 31 Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
TPS7H4001EVM-CVAL — TPS7H4001 evaluation module for one-channel, 18-A, synchronous step-down converter
The TPS7H4001EVM-CVAL evaluation module (EVM) demonstrates how the TPS7H4001-SP buck converter can provide point-of-load (POL) currents up to 18 A for applications where tight regulation tolerance is imperative, such as powering ASICs and FPGAs.
User guide: PDF
Evaluation board
TPS7H4001QEVM-CVAL — TPS7H4001 evaluation module for four-channel, 72-A, synchronous step-down converter
The TPS7H4001QEVM-CVAL evaluation module (EVM) demonstrates how four TPS7H4001-SP buck converters can be configured in master/slave mode to provide a regulated power rail capable of load current up to 72 A to support typical ASIC and FPGA applications.
Evaluation board
TPS7H4003EVM — TPS7H4003 evaluation module for 3-V to 7-V input, 18-A, synchronous step-down converter
The TPS7H4003 evaluation module (EVM) demonstrates how the TPS7H4003-SEP buck converter can provide a regulated power rail capable of load current up to 18 A to support typical application-specific integrated circuit (ASIC) and field-programmable gate array (FPGA) applications.
Evaluation board
STARD-3P-STAR-TIGER — STAR-Dundee STAR-Tiger power supply for SpaceFibre using TI radiation-hardened power and analog ICs
STAR-Tiger is a high-performance SpaceFibre routing switch, part of the European Union Hi-SIDE project, and winner of the Innovation in Space Award from the European Space Forum. The power supply board in the STAR-Tiger unit provides the primary power rails to the Xilinx KU060 FPGA being used to (...)
From: STAR-Dundee Ltd.
Development kit
ALPHA-XILINX-KU060-SPACE — Alpha Data® board for Xilinx® Kintex® UltraScale™ XQRKU060 FPGA with TI power
This is a development kit for the Xilinx® XQRKU060 FPGA with industrial -1 speed grade. ADA-SDEV-KIT2 has a modular board design with a XRTC-compatible configuration module, two FMC connectors, DDR3 DRAM, system monitoring, and space-grade TI power management and temperature-sensing solutions.
Simulation model
TPS7H4001-SP PSpice Worst-Case Analysis (WCA) Model (Rev. A)
SLVMDJ2A.ZIP (21 KB) - PSpice Model
Simulation model
TPS7H4001-SP TINA Average Reference Design (Rev. A)
SLVMD56A.ZIP (144 KB) - TINA-TI Reference Design
Simulation model
TPS7H4001-SP TINA Transient Reference Design (Rev. A)
SLVMD57A.ZIP (168 KB) - TINA-TI Reference Design
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| CFP (HKY) | 34 | Ultra Librarian |
| DIESALE (KGD) | — | |
| HTSSOP (DDW) | 44 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.