CC2420
- True single-chip 2.4 GHz IEEE 802.15.4 compliant RF transceiver with
baseband modem and MAC support - DSSS baseband modem with 2 MChips/s and 250 kbps effective data rate.
- Suitable for both RFD and FFD operation
- Low current consumption (RX: 18.8 mA, TX: 17.4 mA)
- Low supply voltage (2.1 – 3.6 V) with integrated voltage regulator
- Low supply voltage (1.6 – 2.0 V) with external voltage regulator
- Programmable output power
- No external RF switch / filter needed
- I/Q low-IF receiver
- I/Q direct upconversion transmitter
- Very few external components
- 128(RX) + 128(TX) byte data buffering
- Digital RSSI / LQI support
- Hardware MAC encryption (AES-128)
- Battery monitor
- QLP-48 package, 7×7 mm
- Complies with ETSI EN 300 328, EN 300 440 class 2, FCC CFR-47 part 15
and ARIB STD-T66 - Powerful and flexible development tools available
The CC2420 is a true single-chip 2.4 GHz IEEE 802.15.4 compliant RF transceiver designed for low power and low voltage wireless applications. CC2420 includes a digital direct sequence spread spectrum baseband modem providing a spreading gain of 9 dB and an effective data rate of 250 kbps.
The CC2420 is a low-cost, highly integrated solution for robust wireless communication in the 2.4 GHz unlicensed ISM band. It complies with worldwide regulations covered by ETSI EN 300 328 and EN 300 440 class 2 (Europe), FCC CFR47 Part 15 (US) and ARIB STD-T66 (Japan).
The CC2420 provides extensive hardware support for packet handling, data buffering, burst transmissions, data encryption, data authentication, clear channel assessment, link quality indication and packet timing information. These features reduce the load on the host controller and allow CC2420 to interface low-cost microcontrollers.
The configuration interface and transmit / receive FIFOs of CC2420 are accessed via an SPI interface. In a typical application CC2420 will be used together with a microcontroller and a few external passive components.
CC2420 is based on Chipcon’s SmartRF - 03 technology in 0.18 µm CMOS.
技术文档
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
支持的米6体育平台手机版_好二三四和硬件
米6体育平台手机版_好二三四
低功耗 2.4GHz 米6体育平台手机版_好二三四
Sub-1GHz 无线 MCU
Sub-1GHz 收发器
其他无线米6体育平台手机版_好二三四
汽车类无线连接米6体育平台手机版_好二三四
硬件开发
评估板
开发套件
软件
软件编程工具
计算工具
驱动程序或库
SWRC046 — SmartRF(TM) Studio 6.13.1
支持的米6体育平台手机版_好二三四和硬件
米6体育平台手机版_好二三四
低功耗 2.4GHz 米6体育平台手机版_好二三四
Sub-1GHz 无线 MCU
Sub-1GHz 收发器
其他无线米6体育平台手机版_好二三四
软件
计算工具
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
支持的米6体育平台手机版_好二三四和硬件
米6体育平台手机版_好二三四
MSP430 微控制器
低功耗 2.4GHz 米6体育平台手机版_好二三四
Sub-1GHz 无线 MCU
Sub-1GHz 收发器
其他无线米6体育平台手机版_好二三四
汽车类无线连接米6体育平台手机版_好二三四
硬件开发
开发套件
评估板
接口适配器
子卡
SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — SimpleLink™ CC2xxx 器件的硬件设计审查
开始
申请审查 2.4GHz 硬件设计前,应在我们的 E2E 论坛上提交一般设计问题。
请确保您已准备好随硬件设计评审申请表一起发送以下必需文档:
- 确认已查看米6体育平台手机版_好二三四页面上的所有硬件文档,包括数据表、设计指南、用户指南和其他硬件资源
- 提供可移植文档格式 (PDF) 版本的原理图
- 提供物料清单 (BOM)
- 提供审查所需的各种详细信息
- 提供审查所需的电路板设计(包括器件配置和引用标识符)的 Gerber (...)
CC2420EM_REFDES — CC2420EM 参考设计
The reference design demonstrates good techniques for CC2420 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This (...)
CC2420BALUN_REFDES — CC2420 Anaren 不平衡变压器参考设计
封装 | 引脚 | CAD 符号、封装和 3D 模型 |
---|---|---|
VQFN (RGZ) | 48 | Ultra Librarian |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点
推荐米6体育平台手机版_好二三四可能包含与 TI 此米6体育平台手机版_好二三四相关的参数、评估模块或参考设计。