J6PEVM577P
Overview
The DRA77xP/DRA76xP-ACD is an evaluation platform designed to allow scalability and re-use across DRA77xP and DRA76xP JacintoTM Infotainment System-on-Chips (SoCs), it is based on Jacinto DRA77xP SoC that incorporates a heterogeneous, scalable architecture that includes a mix of two ARM Cortex-A15 Microprocessor Units, two Arm® Cortex®-M4 Processing Subsystems, each with two ARM Cortex-Microprocessors, two Digital Signal Processors (DSPC66x), a Vision AccelerationPac including two Embedded Vision Engines (EVEs), 2D and 3D-GraphicProcessing Units including Imagination Technologies POWERVR™ SGX544 dual-core and High-Definition Image and Video Accelerator. Also it integrates a host of peripherals including multi-camera interfaces(both parallel and serial) for LVDS-based surround view systems, CSI2 interface, displays, Controller Area Network (CAN) and GigB Ethernet AVB.
The main CPU board integrates these key peripherals such as Ethernet or HDMI.
Please note that a power supply is NOT included with the Evaluation Module and needs to be purchased separately. A power supply with the following specs is needed:
- 12V DC output
- 5A output
- Positive inner and negative outer terminals
- Female barrel with 2.5mm or 2.1mm inner diameter and 5.5mm outer diameter, insertion depth is 8.85mm
Features
- Hardware
- DRA77xP Processor
- 4GB DDR3L
- TPS65917 + LP87565 Power Management IC Devices
- 4GB eMMC
- Software
- PROCESSOR-SDK-DRA7X
- Connectivity
- Gigabit Ethernet (2)
- MiniPCIe
- e/mSATA
- Micro SD Card
- Micro USB 2.0
- USB 3.0
- HDMI
- Audio in/out
- WiLink8 Q (Connector)
Arm-based processors
Order & start development
DRA76XP-DRA77XP-TDA2PX-ACD-CPUBOARD — ACD CPU Board – SVTronics P/N EVM577PBG-01-00-00
Design files
Technical documentation
Type | Title | Date | ||
---|---|---|---|---|
* | EVM User's guide | DRA77xP/DRA76xP-ACD CPU EVM Board User's Guide (Rev. A) | 26 Nov 2018 |
Related design resources
Software development
SOFTWARE DEVELOPMENT KIT (SDK)
IDE, CONFIGURATION, COMPILER OR DEBUGGER
Design tools & simulation
CALCULATION TOOL
Support & training
Video series
View all videosVideos
Disclaimer
Certain information and resources (including links to non-TI sites) above may be provided by a third-party partner, and is included here merely for your convenience. TI is not the provider of, and is not responsible for, the content of such information and resources, and you should evaluate them carefully for your intended uses and on your own behalf. The inclusion of such information and resources here does not imply endorsement of any third-party company by TI, and shall not be construed as a warranty or representation regarding the suitability of any third-party products or services, either alone or in combination with any TI product or service.