4 修订历史记录

Changes from D Revision (December 2017) to E Revision

• Changed the note under Float(Default) setting from: Reserved to: Power down until valid signal detectedGo
• Changed MISO pin I/O description from 3-Level back to 2-LevelGo
• Changed the Acknowledge (ACK) graphic text from: Clock Line Held Low by Receiver While Interrupt is Serviced to: Host may held clock line low to delay transactionGo
• Changed Channel Register 0x80 default from: 0xXX to: 0x20 Go
• Changed the OUT0_VOD bit 7 default from x to 0Go
• Changed the bit description for the OUT0_VOD bits 7-3 from: drv_0_sel_vod[3:0] default value may change from part to part to: drv_0_sel_vod[3:0] is typically 42 mV per step.Go
• Changed the OUT0_VOD bit 6 default from x to 0Go
• Changed the OUT0_VOD bit 5 default from x to 1Go
• Changed the OUT0_VOD bit 4 default from x to 0Go

Changes from C Revision (December 2016) to D Revision

• Changed Channel Register 0x80 default value from 0101 0100’b to XXXX 0000’bGo

Changes from B Revision (February 2016) to C Revision

• Changed MISO pin I/O description from 2-Level to 3-LevelGo
• Added test conditions to the source transmit differential launch amplitude parametersGo
• Changed OUT0 VOD_Scaling_PD description for bits 7 through 4Go

Changes from A Revision (March 2015) to B Revision

• Changed ESD Ratings for Human-body model (HBM) From: ±2500 To ±4500 Go
• Added typical launch amplitude for 20 and 30 inch FR4 trace in the Recommended Operating ConditionsGo
• Added new Note to the Electrical Characteristics: "ATE Production tested using DC method.."Go
• Changed the V_{VOD_OUT0} row information and values in the Electrical CharacteristicsGo
• Added MAX value of 45 ps to T_{R_F_OUT0} in the Electrical CharacteristicsGo
• Changed the TYP value From: 900 To: 950 ps, Added MIN and MAX values to T_{R_F_OUT0} (270 Mbps) in the Electrical CharacteristicsGo
• Changed the TYP value to 3 ps, Added MAX value of 18 ps to T_{R_F_OUT0_delta} in the Electrical CharacteristicsGo
• Changed the TYP value From: 100 To: 72 ps, Added MAX value of 500 ps to T_{R_F_OUT0_delta} (270 Mbps) in the Electrical CharacteristicsGo
• Changed the V_{OVR_UDR_SHOOT} row information and values in the Electrical CharacteristicsGo
• Added t_SU MIN = 4 ns in the Serial Parallel Interface (SPI) Bus Interface AC Timing SpecificationsGo
• Added t_H MIN = 4 ns in the Serial Parallel Interface (SPI) Bus Interface AC Timing SpecificationsGo
• Added t_SSSu MIN = 14 ns, Changed TYP value From: 14 To: 18 ns in the Serial Parallel Interface (SPI) Bus Interface AC Timing SpecificationsGo
• Added t_SSh MIN = 4 ns in the Serial Parallel Interface (SPI) Bus Interface AC Timing SpecificationsGo
• Added Selective Data Rate Lock in Application and Implementation section. Go

Changes from * Revision (February 2015) to A Revision

• Changed 文档状态米6体育平台手机版_好二三四预览至量产数据Go