Home Sensors Magnetic sensors Hall-effect latches & switches
Home
Sensors
Magnetic sensors
Hall-effect latches & switches

DRV5033-Q1

ACTIVE

Automotive 2.7V to 38V Hall Effect Omnipolar Switch

Order now
Data sheet

DRV5033-Q1

ACTIVE
Data sheet Order now

Product details

Type Omnipolar switch Release point (min) (mT) 0.5, 1 Supply current (µA) 2700 Bandwidth (kHz) 30 Supply voltage (min) (V) 2.7 Supply voltage (max) (V) 38 Rating Automotive Operating temperature range (°C) -40 to 150 Output Open drain
Type Omnipolar switch Release point (min) (mT) 0.5, 1 Supply current (µA) 2700 Bandwidth (kHz) 30 Supply voltage (min) (V) 2.7 Supply voltage (max) (V) 38 Rating Automotive Operating temperature range (°C) -40 to 150 Output Open drain
SOT-23 (DBZ) 3 6.9204 mm² 2.92 x 2.37 TO-92 (LPG) 3 6.08 mm² 4 x 1.52
  • Digital Omnipolar-Switch Hall Sensor
  • AEC-Q100 Qualified for Automotive Applications
    • Grade 1: TA = –40 to 125°C (Q, See Device Nomenclature)
    • Grade 0: TA = –40 to 150°C (E, See Device Nomenclature)
  • Superior Temperature Stability
    • BOP ±10% Over Temperature
  • Multiple Sensitivity Options (BOP / BRP):
    • ±3.5 / ±2 mT (FA, see Device Nomenclature)
    • ±6.9 / ±3.5 mT (AJ, see Device Nomenclature)
  • Detects North and South Magnetic Field
  • Supports a Wide Voltage Range
    • 2.7 to 38 V
    • No External Regulator Required
  • Open Drain Output (30-mA Sink)
  • Fast 35-µs Power-On Time
  • Small Package and Footprint
    • Surface Mount 3-Pin SOT-23 (DBZ)
      • 2.92 mm × 2.37 mm
    • Through-Hole 3-Pin TO-92 (LPG)
      • 4.00 mm × 3.15 mm
  • Protection Features
    • Reverse Supply Protection (up to –22 V)
    • Supports up to 40-V Load Dump
    • Output Short-Circuit Protection
    • Output Current Limitation
    • OUT Short to Battery Protection
  • Digital Omnipolar-Switch Hall Sensor
  • AEC-Q100 Qualified for Automotive Applications
    • Grade 1: TA = –40 to 125°C (Q, See Device Nomenclature)
    • Grade 0: TA = –40 to 150°C (E, See Device Nomenclature)
  • Superior Temperature Stability
    • BOP ±10% Over Temperature
  • Multiple Sensitivity Options (BOP / BRP):
    • ±3.5 / ±2 mT (FA, see Device Nomenclature)
    • ±6.9 / ±3.5 mT (AJ, see Device Nomenclature)
  • Detects North and South Magnetic Field
  • Supports a Wide Voltage Range
    • 2.7 to 38 V
    • No External Regulator Required
  • Open Drain Output (30-mA Sink)
  • Fast 35-µs Power-On Time
  • Small Package and Footprint
    • Surface Mount 3-Pin SOT-23 (DBZ)
      • 2.92 mm × 2.37 mm
    • Through-Hole 3-Pin TO-92 (LPG)
      • 4.00 mm × 3.15 mm
  • Protection Features
    • Reverse Supply Protection (up to –22 V)
    • Supports up to 40-V Load Dump
    • Output Short-Circuit Protection
    • Output Current Limitation
    • OUT Short to Battery Protection

The DRV5033-Q1 device is a chopper-stabilized Hall Effect Sensor that offers a magnetic sensing solution with superior sensitivity stability over temperature and integrated protection features.

The DRV5033-Q1 responds the same to both polarities of magnetic field direction. When the applied magnetic flux density exceeds the BOP threshold, the DRV5033-Q1 open-drain output goes low. The output stays low until the field decreases to less than BRP, and then the output goes to high impedance. The output current sink capability is 30 mA. A wide operating voltage range from 2.7 to 38 V with reverse polarity protection up to –22 V makes the device suitable for a wide range of automotive applications.

Internal protection functions are provided for reverse supply conditions, load dump, and output short circuit or over current.

The DRV5033-Q1 device is a chopper-stabilized Hall Effect Sensor that offers a magnetic sensing solution with superior sensitivity stability over temperature and integrated protection features.

The DRV5033-Q1 responds the same to both polarities of magnetic field direction. When the applied magnetic flux density exceeds the BOP threshold, the DRV5033-Q1 open-drain output goes low. The output stays low until the field decreases to less than BRP, and then the output goes to high impedance. The output current sink capability is 30 mA. A wide operating voltage range from 2.7 to 38 V with reverse polarity protection up to –22 V makes the device suitable for a wide range of automotive applications.

Internal protection functions are provided for reverse supply conditions, load dump, and output short circuit or over current.

filter Find other Hall-effect latches & switches
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 10
Type Title Date
* Data sheet DRV5033-Q1 Automotive Digital-Omnipolar-Switch Hall Effect Sensor datasheet (Rev. E) PDF | HTML 06 Sep 2016
Application brief Introduction to TI Magnetic Sense Simulator Features PDF | HTML 05 Dec 2023
User guide Texas Instruments' Magnetic Sense Simulator User's Guide PDF | HTML 04 Dec 2023
Application note Capacitive, Inductive, and Hall Sensing for HMI in Automotive Applications (Rev. A) PDF | HTML 09 May 2023
Application brief Transition Detection Using Hall-Effect Sensors (Rev. A) PDF | HTML 09 Jun 2022
Application note HMI Rocker Switch With Hall-Effect Switches PDF | HTML 21 Jan 2022
Application brief Multi-State Position Selection Using Hall-Effect Sensors PDF | HTML 13 Jan 2022
Application note Understanding and Applying Hall Effect Sensor Data Sheets (Rev. A) PDF | HTML 07 Dec 2021
Application brief Hall-Effect Sensors in Low-Power Applications (Rev. B) PDF | HTML 15 Oct 2021
Technical article Measuring wheels in motion PDF | HTML 24 Apr 2015

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

HALL-ADAPTER-EVM — Hall sensor breakout adapter evaluation module

Speed up your switch, latch and linear Hall sensor prototyping and testing with the HALL-ADAPTER-EVM, which provides a fast, easy and inexpensive way to interface with small ICs. You can connect any supported Hall sensor using the included Samtec terminal strips or wire them directly to existing (...)
User guide: PDF | HTML
Not available on TI.com
Evaluation board

HALL-HMI-ROCKER-EVM — Evaluation module for human machine interface (HMI) rocker switch using Hall-effect switches

HALLROCKER-EVM is designed to evaluate the performance of Hall-effect switches in SOT-23 package in a rocker switch human machine interface (HMI) module. This module shows three different switches in accordance with the designs presented in the HMI Rocker Switch With Hall-Effect Switches (...)
User guide: PDF | HTML
Not available on TI.com
Calculation tool

HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool

HALL-PROXIMITY-DESIGN is a software tool that facilitates rapid iterative design for magnet and Hall-effect sensor systems.

Supported products & hardware

Supported products & hardware

Products
Multi-axis linear & angle position sensors
TMAG5170 — High-precision, linear 3D Hall-effect sensor with SPI bus interface TMAG5170-Q1 — Automotive, high-precision, linear 3D Hall-effect sensor with SPI bus interface TMAG5173-Q1 — Automotive, high-precision, linear 3D Hall-effect sensor with I²C interface TMAG5273 — Low-power linear 3D Hall-effect sensor with I²C interface
Linear Hall-effect sensors
DRV5053 — High voltage (up to 38V), linear hall effect sensor DRV5053-Q1 — Automotive, high voltage (up to 38V), linear hall effect sensor DRV5055 — Ratiometric linear hall effect sensor with analog output DRV5055-Q1 — Automotive, ratiometric linear Hall-effect sensor with analog output DRV5056 — Ratiometric unipolar linear hall effect sensor with analog output DRV5056-Q1 — Automotive, ratiometric unipolar linear hall effect sensor with analog output DRV5057 — Linear hall effect sensor with digital PWM output DRV5057-Q1 — Automotive linear hall effect sensor with digital PWM output
Hall-effect latches & switches
DRV5011 — Small size (available in WCSP and X2SON), low voltage (up to 5.5-V) Hall effect latch DRV5012 — Low power (as low as 3.3-µA), low voltage (up to 5.5-V) Hall effect latch DRV5013 — High voltage (up to 38V), high bandwidth (30kHz) Hall-effect latch DRV5013-Q1 — Automotive, high voltage (up to 38V), high bandwidth (30-kHz) Hall effect latch DRV5015 — High sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch DRV5015-Q1 — Automotive, high sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch DRV5021 — Low voltage (up to 5.5V), high bandwidth (up to 30 kHz) unipolar switch DRV5021-Q1 — Automotive 2.5-V to 5.5-V Hall effect unipolar switch DRV5023 — High voltage (up to 38V), high bandwidth (up to 30 kHz) unipolar switch DRV5023-Q1 — Automotive 2.7V to 38V Hall Effect Unipolar Switch DRV5032 — Low-power (5Hz, <1µA) low-voltage (up to 5.5V) switch DRV5033 — High voltage (up to 38V), high bandwidth (up to 30 kHz) omnipolar switch DRV5033-Q1 — Automotive 2.7V to 38V Hall Effect Omnipolar Switch TMAG5110 — High-sensitivity, 2D, dual-channel, Hall-effect latch TMAG5110-Q1 — Automotive, high-sensitivity, 2D, dual-channel, Hall-effect latch TMAG5111 — High-sensitivity, 2D, dual-channel, speed and direction outputs, Hall-effect latch TMAG5111-Q1 — Automotive, high-sensitivity, 2D, dual-channel, speed and direction outputs, Hall-effect latch TMAG5123 — High-voltage (up to 38 V), in-plane, high-precision switch TMAG5123-Q1 — Automotive, in-plane, high-precision, high-voltage switch TMAG5124 — Two-wire (current output), high-voltage (up to 38 V), high-precision switch for remote sensing TMAG5131-Q1 — Automotive low-power (10 Hz, 1 µA) low-voltage (down to 1.65 V) Hall-effect switch TMAG5231 — Low-power, low-voltage (1.65 V to 5.5 V) Hall-effect switch TMAG5328 — Resistor-adjustable, low-power Hall-effect switch
Hardware development
Evaluation board
DRV5055-5057EVM — DRV5055, DRV5056 and DRV5057 linear Hall effect sensor evaluation module DRV5055EVM — DRV5055 evaluation module HALL-ADAPTER-EVM — Hall sensor breakout adapter evaluation module TMAG5170UEVM — TMAG5170 evaluation module for high-precision, linear 3D Hall-effect sensor with SPI bus interface
Software
Calculation tool
HALL-PROXIMITY-DESIGN — Magnetic sensing proximity tool
Download
Simulation tool

TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool

The TI-MAGNETIC-SENSE-SIMULATOR (TIMSS) webtool estimates magnetic flux density and TI magnetic sensor outputs for magnetic position sensing systems. Select from our portfolio of magnetic sensors to thoroughly emulate electro-mechanical performance of your design. The tool supports various magnet (...)
Supported products & hardware

Supported products & hardware

Products
Hall-effect latches & switches
DRV5011 — Small size (available in WCSP and X2SON), low voltage (up to 5.5-V) Hall effect latch DRV5012 — Low power (as low as 3.3-µA), low voltage (up to 5.5-V) Hall effect latch DRV5013 — High voltage (up to 38V), high bandwidth (30kHz) Hall-effect latch DRV5013-Q1 — Automotive, high voltage (up to 38V), high bandwidth (30-kHz) Hall effect latch DRV5015 — High sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch DRV5015-Q1 — Automotive, high sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch DRV5021 — Low voltage (up to 5.5V), high bandwidth (up to 30 kHz) unipolar switch DRV5021-Q1 — Automotive 2.5-V to 5.5-V Hall effect unipolar switch DRV5023 — High voltage (up to 38V), high bandwidth (up to 30 kHz) unipolar switch DRV5023-Q1 — Automotive 2.7V to 38V Hall Effect Unipolar Switch DRV5032 — Low-power (5Hz, <1µA) low-voltage (up to 5.5V) switch DRV5033 — High voltage (up to 38V), high bandwidth (up to 30 kHz) omnipolar switch DRV5033-Q1 — Automotive 2.7V to 38V Hall Effect Omnipolar Switch TMAG5110 — High-sensitivity, 2D, dual-channel, Hall-effect latch TMAG5110-Q1 — Automotive, high-sensitivity, 2D, dual-channel, Hall-effect latch TMAG5111 — High-sensitivity, 2D, dual-channel, speed and direction outputs, Hall-effect latch TMAG5111-Q1 — Automotive, high-sensitivity, 2D, dual-channel, speed and direction outputs, Hall-effect latch TMAG5115 — High-speed Hall-effect latch with low jitter (fast response) TMAG5123 — High-voltage (up to 38 V), in-plane, high-precision switch TMAG5123-Q1 — Automotive, in-plane, high-precision, high-voltage switch TMAG5124 — Two-wire (current output), high-voltage (up to 38 V), high-precision switch for remote sensing TMAG5124-Q1 — Automotive 2-wire high-voltage (up to 38 V), high-precision switch TMAG5131-Q1 — Automotive low-power (10 Hz, 1 µA) low-voltage (down to 1.65 V) Hall-effect switch TMAG5213 — High-bandwidth (30-kHz), high-voltage (26 V) Hall-effect latch for low-cost applications TMAG5231 — Low-power, low-voltage (1.65 V to 5.5 V) Hall-effect switch TMAG5233 — In-plane (X-axis) Hall-effect switch TMAG5328 — Resistor-adjustable, low-power Hall-effect switch
Linear Hall-effect sensors
DRV5053 — High voltage (up to 38V), linear hall effect sensor DRV5053-Q1 — Automotive, high voltage (up to 38V), linear hall effect sensor DRV5055 — Ratiometric linear hall effect sensor with analog output DRV5055-Q1 — Automotive, ratiometric linear Hall-effect sensor with analog output DRV5056 — Ratiometric unipolar linear hall effect sensor with analog output DRV5056-Q1 — Automotive, ratiometric unipolar linear hall effect sensor with analog output DRV5057 — Linear hall effect sensor with digital PWM output DRV5057-Q1 — Automotive linear hall effect sensor with digital PWM output TMAG5253 — Low-power linear Hall-effect sensor with enable pin in ultrasmall X2SON package
Multi-axis linear & angle position sensors
TMAG3001 — Three-axis linear Hall-effect sensor with I²C and programmable switch in wafer chip-scale package TMAG5170 — High-precision, linear 3D Hall-effect sensor with SPI bus interface TMAG5170-Q1 — Automotive, high-precision, linear 3D Hall-effect sensor with SPI bus interface TMAG5170D-Q1 — Automotive, high-precision, 3D linear Hall-effect dual-die sensor with SPI interface TMAG5173-Q1 — Automotive, high-precision, linear 3D Hall-effect sensor with I²C interface TMAG5273 — Low-power linear 3D Hall-effect sensor with I²C interface TMAG6180-Q1 — Automotive high-precision analog AMR angle sensor with 360° angle range TMAG6181-Q1 — Automotive high-precision analog AMR angle sensor with integrated turns counter
Hardware development
Evaluation board
DRV5011-5012EVM — DRV5011 and DRV5012 Ultra-Low Power, Digital-Latch Hall Effect Sensor Evaluation Module DRV5032-SOLAR-EVM — DRV5032 Ultra-Low Power, 1.65V to 5.5V Hall Effect Switch Sensor Evaluation Module DRV5055-5057EVM — DRV5055, DRV5056 and DRV5057 linear Hall effect sensor evaluation module DRV5055-ANGLE-EVM — DRV5055 angle evaluation module DRV5055EVM — DRV5055 evaluation module HALL-ADAPTER-EVM — Hall sensor breakout adapter evaluation module HALL-HINGE-EVM — TMAG5231 evaluation module for Hall-effect hinge HALL-HMI-ROCKER-EVM — Evaluation module for human machine interface (HMI) rocker switch using Hall-effect switches HALL-TRIGGER-EVM — Evaluation module for contactless, Hall-effect variable-speed trigger with external field protection LDC-HALL-HMI-EVM — Evaluation module for inductive touch and magnetic dial contactless user-interface design TMAG3001EVM — TMAG3001 evaluation module for three-axis linear Hall-effect sensor with I²C and programmable switch TMAG5110-5111EVM — TMAG511x evaluation module for high-sensitivity, 2D, dual-channel, Hall-effect latches TMAG5115EVM — TMAG5115 evaluation module for high-sensitivity low-jitter high-voltage Hall-effect latches TMAG5123EVM — TMAG5123 in-plane high-precision Hall effect switch evaluation module TMAG5124EVM — TMAG5124 2-wire Hall-effect switch evaluation module TMAG5170DEVM — TMAG5170DEVM evaluation module for high-precision 3D linear Hall-effect dual-die sensor TMAG5170UEVM — TMAG5170 evaluation module for high-precision, linear 3D Hall-effect sensor with SPI bus interface TMAG5173EVM — TMAG5173-Q1 evaluation module for automotive, high-precision, linear 3D Hall-effect sensor with I²C TMAG5253EVM — TMAG5253 evaluation module for low-power linear Hall-effect sensor TMAG5273EVM — TMAG5273 evaluation module for low-power, linear 3D Hall-effect sensor with I²C interface TMAG5328EVM — TMAG5328 evaluation module for resistor-adjustable, low-power Hall-effect switch TMAG6180-6181EVM — TMAG6180 and TMAG6181 evaluation module with differential sine and cosine analog outputs
Software
Calculation tool
HALL-PROXIMITY-DESIGN — Magnetic sensing proximity tool
Launch Download
Package Pins CAD symbols, footprints & 3D models
SOT-23 (DBZ) 3 Ultra Librarian
TO-92 (LPG) 3 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos