The TMUX136 device is a high performance, 6-GHz, 2-channel, 2:1 switch that will support both differential and single ended signals. The device has a wide V CC range of 2.3 V to 4.8 V and supports a power-off protection feature forcing all I/O pins to be in high-impedance mode when power is not present on the V CC pin. The select pins of TMUX136 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from low voltage processors. The flow-through pinout, where inputs and outputs are on opposite sides of the device, simplifies layout routing . This, along with the low on-resistance and low on-capacitance of the device, make the TMUX136 an optimal device for supporting switching a wide range of analog signals and digital communication protocol standards, including high-speed standards such as I 3C.
The TMUX136 comes in a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it useful when PCB area is limited.
Products with similar specifications, sorted by available TI.com inventory.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | TMUX136 6-GHz, 2-Channel, 2:1 Switch, With Power-Off Isolation datasheet (Rev. E) | PDF | HTML | 05 Jun 2023 |
| Application note | Designing with Multiple Multiplexers in Series: A Guide to Cascading Multiplexers | PDF | HTML | 31 Jan 2024 | |
| Application brief | Important Multiplexer Characteristics for I3C Applications | PDF | HTML | 27 Jul 2023 | |
| Application brief | Best Practices: I2C Devices on an I3C Shared Bus | PDF | HTML | 30 Mar 2023 | |
| Application brief | 1.8-V Logic for Multiplexers and Signal Switches (Rev. C) | PDF | HTML | 26 Jul 2022 | |
| Application note | Selecting the Correct Texas Instruments Signal Switch (Rev. E) | PDF | HTML | 02 Jun 2022 | |
| Application note | Multiplexers and Signal Switches Glossary (Rev. B) | PDF | HTML | 01 Dec 2021 | |
| Application brief | Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C) | PDF | HTML | 06 Jan 2021 | |
| Application brief | Improve Stability Issues with Low Con Multiplexers (Rev. A) | 10 Dec 2018 |
For additional terms or required resources, click any title below to view the detail page where available.
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| UQFN (RSE) | 10 | Ultra Librarian |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.