ホーム データ・コンバータ A/D コンバータ (ADC) 高精度 ADC
ホーム
データ・コンバータ
A/D コンバータ (ADC)
高精度 ADC

ADS1259-Q1

アクティブ

車載向け、低ドリフトの Vref 搭載、ダイナミック・レンジの広いシステム向け、24 ビット、14.4kSPS、1 チャネル・デルタ・シグマ ADC

ご注文はこちら
データシート

ADS1259-Q1

アクティブ
データシート ご注文はこちら

製品詳細

Resolution (Bits) 24 Sample rate (max) (ksps) 14.4 Number of input channels 1 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Rating Automotive Reference mode External, Internal Input voltage range (max) (V) 2.75, 5.35 Input voltage range (min) (V) -2.7, 0 Features 50/60 Hz Rejection, Oscillator Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 13 Analog supply (min) (V) 4.75 Analog supply voltage (max) (V) 5.25 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.25
Resolution (Bits) 24 Sample rate (max) (ksps) 14.4 Number of input channels 1 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Rating Automotive Reference mode External, Internal Input voltage range (max) (V) 2.75, 5.35 Input voltage range (min) (V) -2.7, 0 Features 50/60 Hz Rejection, Oscillator Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 13 Analog supply (min) (V) 4.75 Analog supply voltage (max) (V) 5.25 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.25
TSSOP (PW) 20 41.6 mm² 6.5 x 6.4
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Temperature Grade 1: –40°C to 125°C
    • HBM ESD Classification 2
    • CDM ESD Classification C4B
  • Programmable Data Rates: 10 SPS to 14.4 kSPS
  • Single-Cycle Settling Digital Filter
  • High Performance:
    • 21.3 ENOB at 1.2 kSPS
    • INL: 3 ppm
    • Offset Drift: 0.05 µV/°C
    • Gain Drift: 0.5 ppm/°C
  • Internal Reference: 2.5 V, 10 ppm/°C Drift
  • Internal 2% Accurate Oscillator
  • Input Signal Out-of-Range Detection
  • Optional Checksum and Redundant Data-Read Capability
    to Augment Data Integrity
  • SPI-Compatible Interface, Mode 1
  • Analog Supply: 5 V or ±2.5 V
  • Digital Supply: 2.7 V to 5 V
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Temperature Grade 1: –40°C to 125°C
    • HBM ESD Classification 2
    • CDM ESD Classification C4B
  • Programmable Data Rates: 10 SPS to 14.4 kSPS
  • Single-Cycle Settling Digital Filter
  • High Performance:
    • 21.3 ENOB at 1.2 kSPS
    • INL: 3 ppm
    • Offset Drift: 0.05 µV/°C
    • Gain Drift: 0.5 ppm/°C
  • Internal Reference: 2.5 V, 10 ppm/°C Drift
  • Internal 2% Accurate Oscillator
  • Input Signal Out-of-Range Detection
  • Optional Checksum and Redundant Data-Read Capability
    to Augment Data Integrity
  • SPI-Compatible Interface, Mode 1
  • Analog Supply: 5 V or ±2.5 V
  • Digital Supply: 2.7 V to 5 V

The ADS1259-Q1 is a precision, low-drift, 24-bit, analog-to-digital converter (ADC). The device can perform conversions at data rates up to 14.4 kSPS with high resolution and is therefore ideally suited to measure rapidly changing signals that have a wide dynamic range. An integrated low-noise, low-drift 2.5-V reference eliminates the need for an external voltage reference, thus reducing system cost and component count.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise performance and linearity. The device can use the integrated oscillator, an external crystal, or an external clock as the ADC clock source.

A fast-responding input overrange detector flags the conversion data if an input overrange event occurs. To augment data integrity in noisy automotive environments the ADS1259-Q1 offers an optional checksum byte and a redundant conversion data-read capability.

The ADS1259-Q1 consumes 13 mW during operation and less than 25 µW when powered down. TI offers the ADS1259-Q1 device in a TSSOP-20 package with full specification from –40°C to 125°C.

The ADS1259-Q1 is a precision, low-drift, 24-bit, analog-to-digital converter (ADC). The device can perform conversions at data rates up to 14.4 kSPS with high resolution and is therefore ideally suited to measure rapidly changing signals that have a wide dynamic range. An integrated low-noise, low-drift 2.5-V reference eliminates the need for an external voltage reference, thus reducing system cost and component count.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise performance and linearity. The device can use the integrated oscillator, an external crystal, or an external clock as the ADC clock source.

A fast-responding input overrange detector flags the conversion data if an input overrange event occurs. To augment data integrity in noisy automotive environments the ADS1259-Q1 offers an optional checksum byte and a redundant conversion data-read capability.

The ADS1259-Q1 consumes 13 mW during operation and less than 25 µW when powered down. TI offers the ADS1259-Q1 device in a TSSOP-20 package with full specification from –40°C to 125°C.
filter その他の 高精度 ADC を検索
ダウンロード

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート Automotive, 14.4-kSPS, 24-Bit ADC with Integrated Low-Drift Reference データシート 2014年 3月 19日

購入と品質

記載されている情報：
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報：
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

投稿されたすべてのフォーラムトピック (英語) を表示

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​