拡張ハードウェア機能搭載、低コスト、低消費電力、シングルチップ、2.4GHz ISM (産業用、科学、医療) バンド トランシーバ

CC2400 は新規設計での使用を推奨しません
これまでにご購入されたお客様をサポートする目的でこの製品を引き続き生産しています。新規設計では代替品をご検討ください。
open-in-new 代替品と比較
比較対象デバイスと類似の機能
CC2500 アクティブ 低消費電力ワイヤレス・アプリケーション向けに設計済み、2.4GHz ISM 帯域使用、低コスト、低消費電力、2.4GHz RF トランシーバ This product is a newer device with improved functionality.

製品詳細

Operating temperature range (°C) -40 to 85 Rating Catalog
Operating temperature range (°C) -40 to 85 Rating Catalog
VQFN (RSU) 48 49 mm² 7 x 7
  • True single-chip 2.4 GHz RF transceiver with baseband modem
  • 10 kbps, 250 kbps and 1 Mbps over-the-air data rates
  • Low current consumption (RX: 24 mA)
  • Low core supply voltage (1.8 V)
  • Programmable output power
  • No external RF switch / filter needed
  • I/Q low-IF receiver
  • I/Q direct up-conversion transmitter
  • Few external components
  • FIFO allows bursting of data
  • Packet handling hardware
  • Data buffering
  • Digital RSSI output
  • Small size (QFN 48 package), 7x7 mm
  • Reference design complies with EN 300 328, EN 300 440, FCC CFR47 part 15 and ARIB STD-T66
  • Powerful and flexible development tools available
  • Easy-to-use software for generating the CC2400 configuration data
  • Applications
    • 2.4 GHz MHz ISM/SRD band systems
    • Game controllers
    • Sports and leisure equipment
    • Wireless audio
    • PC peripherals
    • Advanced toys

  • True single-chip 2.4 GHz RF transceiver with baseband modem
  • 10 kbps, 250 kbps and 1 Mbps over-the-air data rates
  • Low current consumption (RX: 24 mA)
  • Low core supply voltage (1.8 V)
  • Programmable output power
  • No external RF switch / filter needed
  • I/Q low-IF receiver
  • I/Q direct up-conversion transmitter
  • Few external components
  • FIFO allows bursting of data
  • Packet handling hardware
  • Data buffering
  • Digital RSSI output
  • Small size (QFN 48 package), 7x7 mm
  • Reference design complies with EN 300 328, EN 300 440, FCC CFR47 part 15 and ARIB STD-T66
  • Powerful and flexible development tools available
  • Easy-to-use software for generating the CC2400 configuration data
  • Applications
    • 2.4 GHz MHz ISM/SRD band systems
    • Game controllers
    • Sports and leisure equipment
    • Wireless audio
    • PC peripherals
    • Advanced toys

The CC2400 is a true single-chip 2.4 GHz RF transceiver designed for low-power and low-voltage wireless applications. The RF transceiver is integrated with a baseband modem supporting data rates up to 1 Mbps.

The CC2400 is a low-cost, highly integrated solution enabling robust wireless communication in the 2.4 - 2.4835 GHz unlicensed ISM band. It is intended for systems compliant with world-wide regulations covered by EN 300 440 (Europe), CFR47 Part 15 (US) and ARIB STD-T66 (Japan).

Targeting a wide range of applications at 2.4 GHz, the CC2400 supports over-the-air data rates of 10 kbps, 250 kbps and 1 Mbps without requiring any modifications to the hardware.

The CC2400 provides extensive hardware support for packet handling, data buffering, burst transmissions, data coding and error detection reducing the workload on the host microcontroller.

The main operating parameters of CC2400 can be programmed via an SPI-bus. In a typical system CC2400 will be used together with a microcontroller and a few external, passive components.

CC2400 is based on Chipcon’s SmartRF®-03 technology in 0.18 µm CMOS.

The CC2400 is a true single-chip 2.4 GHz RF transceiver designed for low-power and low-voltage wireless applications. The RF transceiver is integrated with a baseband modem supporting data rates up to 1 Mbps.

The CC2400 is a low-cost, highly integrated solution enabling robust wireless communication in the 2.4 - 2.4835 GHz unlicensed ISM band. It is intended for systems compliant with world-wide regulations covered by EN 300 440 (Europe), CFR47 Part 15 (US) and ARIB STD-T66 (Japan).

Targeting a wide range of applications at 2.4 GHz, the CC2400 supports over-the-air data rates of 10 kbps, 250 kbps and 1 Mbps without requiring any modifications to the hardware.

The CC2400 provides extensive hardware support for packet handling, data buffering, burst transmissions, data coding and error detection reducing the workload on the host microcontroller.

The main operating parameters of CC2400 can be programmed via an SPI-bus. In a typical system CC2400 will be used together with a microcontroller and a few external, passive components.

CC2400 is based on Chipcon’s SmartRF®-03 technology in 0.18 µm CMOS.

ダウンロード

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
3 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* 放射線と信頼性レポート CC2400 Reliability Report 2006年 4月 28日
* データシート 2.4 GHz Low-Power RF Transceiver データシート (Rev. A) 2006年 3月 21日
* エラッタ CC2400 Errata Notes 2006年 1月 31日

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点