主页 电源管理 电源开关 电子保险丝和热插拔控制器

LM25066A

正在供货

具有 I2C 和 PMBus 及更高监控精度的 2.9V 至 17V 热插拔控制器

米6体育平台手机版_好二三四详情

FET External Vin (min) (V) 2.9 Vin (max) (V) 17 Vabsmax_cont (V) 24 Current limit (min) (A) 0.01 Current limit (max) (A) 500 Overcurrent response Circuit breaker, current limiting Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Cut-off Features Current monitoring, Fault output, PMBus, Power good signal Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection, Thermal shutdown
FET External Vin (min) (V) 2.9 Vin (max) (V) 17 Vabsmax_cont (V) 24 Current limit (min) (A) 0.01 Current limit (max) (A) 500 Overcurrent response Circuit breaker, current limiting Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Cut-off Features Current monitoring, Fault output, PMBus, Power good signal Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection, Thermal shutdown
WQFN (NHZ) 24 20 mm² 5 x 4

  • Input voltage range: 2.9V to 17V
  • I 2 C/SMBus interface and PMBus compliant command structure
  • Programmable 25mV or 46mV current limit threshold
  • Configurable circuit breaker protection for hard shorts
  • Configurable under-voltage and over-voltage lockouts with hysteresis
  • Remote temperature sensing with programmable warning and shutdown thresholds
  • Detection and notification of damaged MOSFET condition
  • Real time monitoring of VIN, VOUT, IIN, PIN, VAUX with 12-bit resolution and 1 kHz sampling rate
  • Current measurement accuracy: ±1% over temperature
  • Power measurement accuracy: ±2% over temperature
  • True input power measurement using simultaneous sampling of VIN and IIN accurately averages dynamic power readings
  • Averaging of VIN, IIN, PIN, and VOUT over programmable interval ranging from 0.001 to 4 seconds
  • Programmable WARN and FAULT thresholds with ^SMBA notification
  • Black box capture of telemetry measurements and device status triggered by WARN or FAULT condition
  • 24-lead LLP package

  • Input voltage range: 2.9V to 17V
  • I 2 C/SMBus interface and PMBus compliant command structure
  • Programmable 25mV or 46mV current limit threshold
  • Configurable circuit breaker protection for hard shorts
  • Configurable under-voltage and over-voltage lockouts with hysteresis
  • Remote temperature sensing with programmable warning and shutdown thresholds
  • Detection and notification of damaged MOSFET condition
  • Real time monitoring of VIN, VOUT, IIN, PIN, VAUX with 12-bit resolution and 1 kHz sampling rate
  • Current measurement accuracy: ±1% over temperature
  • Power measurement accuracy: ±2% over temperature
  • True input power measurement using simultaneous sampling of VIN and IIN accurately averages dynamic power readings
  • Averaging of VIN, IIN, PIN, and VOUT over programmable interval ranging from 0.001 to 4 seconds
  • Programmable WARN and FAULT thresholds with ^SMBA notification
  • Black box capture of telemetry measurements and device status triggered by WARN or FAULT condition
  • 24-lead LLP package

  • The LM25066A combines a high performance hot-swap controller with a PMBus compliant SMBus/I 2C interface to accurately measure, protect and control the electrical operating conditions of computing and storage blades connected to a backplane power bus. The LM25066A continuously supplies real-time power, voltage, current, temperature and fault data to the system management host via the SMBus interface.

    The LM25066A control block includes a unique hot-swap architecture that provides current and power limiting to protect sensitive circuitry during insertion of boards into a live system backplane, or any other "hot" power source. A fast acting circuit breaker prevents damage in the event of a short circuit on the output. The input under-voltage and over-voltage levels and hysteresis are configurable, as well as the insertion delay time and fault detection time. A temperature monitoring block on the LM25066A interfaces with a low-cost external diode for monitoring the temperature of the external MOSFET or other thermally sensitive components. The POWER GOOD output provides a fast indicator when the input and/or output voltages are outside their programmed range. LM25066A current measurement accuracy is ±1% over temperature.

    The LM25066A monitoring block computes both the real-time and average values of subsystem operating parameters (VIN, IIN, PIN, VOUT) as well as the peak power. Accurate power averaging is accomplished by averaging the product of the input voltage and current. A black box (Telemetry/Fault Snapshot) function captures and stores telemetry data and device status in the event of a warning or a fault.


    The LM25066A combines a high performance hot-swap controller with a PMBus compliant SMBus/I 2C interface to accurately measure, protect and control the electrical operating conditions of computing and storage blades connected to a backplane power bus. The LM25066A continuously supplies real-time power, voltage, current, temperature and fault data to the system management host via the SMBus interface.

    The LM25066A control block includes a unique hot-swap architecture that provides current and power limiting to protect sensitive circuitry during insertion of boards into a live system backplane, or any other "hot" power source. A fast acting circuit breaker prevents damage in the event of a short circuit on the output. The input under-voltage and over-voltage levels and hysteresis are configurable, as well as the insertion delay time and fault detection time. A temperature monitoring block on the LM25066A interfaces with a low-cost external diode for monitoring the temperature of the external MOSFET or other thermally sensitive components. The POWER GOOD output provides a fast indicator when the input and/or output voltages are outside their programmed range. LM25066A current measurement accuracy is ±1% over temperature.

    The LM25066A monitoring block computes both the real-time and average values of subsystem operating parameters (VIN, IIN, PIN, VOUT) as well as the peak power. Accurate power averaging is accomplished by averaging the product of the input voltage and current. A black box (Telemetry/Fault Snapshot) function captures and stores telemetry data and device status in the event of a warning or a fault.


    下载 观看带字幕的视频 视频

    您可能感兴趣的相似米6体育平台手机版_好二三四

    功能与比较器件相同,且具有相同引脚
    LM25066I 正在供货 具有 I2C 和 PMBus 的 2.9V 至 17V 热插拔控制器,带有 Intel 节点管理器 Hot swap controller with I2C and PMBus with Intel node manager
    功能与比较器件相同,但引脚排列有所不同
    TPS25990 正在供货 具有数字遥测控制器的 2.9V 至 16V、0.79mΩ、60A 电子保险丝 Integrated MOSFET, higher current density and stackable

    技术文档

    star =有关此米6体育平台手机版_好二三四的 TI 精选热门文档
    未找到结果。请清除搜索并重试。
    查看全部 7
    类型 标题 下载最新的英语版本 日期
    * 数据表 LM25066A System Power Management and Protection IC with PMBus 数据表 (Rev. D) 最新英语版本 (Rev.G) PDF | HTML 2011年 7月 11日
    应用手册 Basics of Power Switches (Rev. A) PDF | HTML 2019年 4月 26日
    选择指南 电源管理指南 2018 (Rev. K) 2018年 7月 31日
    选择指南 电源管理指南 2018 (Rev. R) 2018年 6月 25日
    技术文章 Simplify digital hot swap design using the PI-Commander GUI PDF | HTML 2016年 6月 6日
    应用手册 Robust Hot Swap Design (Rev. A) 2015年 4月 8日
    用户指南 AN-2100 LM25066 Evaluation Board (Rev. C) 2013年 4月 26日

    设计和开发

    如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

    评估模块 (EVM) 用 GUI

    SLVC572 PI-Commander EVM GUI

    支持的米6体育平台手机版_好二三四和硬件

    支持的米6体育平台手机版_好二三四和硬件

    米6体育平台手机版_好二三四
    电子保险丝和热插拔控制器
    LM25066 具有 PMBus 的 2.9V 至 17V 热插拔控制器 LM25066A 具有 I2C 和 PMBus 及更高监控精度的 2.9V 至 17V 热插拔控制器 LM25066I 具有 I2C 和 PMBus 的 2.9V 至 17V 热插拔控制器,带有 Intel 节点管理器 LM25066IA 具有 I2C 和 PMBus 及更高监控精度的 2.9V 至 17V 热插拔控制器,带有 Intel 节点 LM5064 具有 PMBus 的 -10V 至 -80V 热插拔控制器 LM5066 具有电流、电压和功率监控功能及 PMBus 的 10V 至 80V 热插拔控制器 LM5066I 具有更高电流、电压和功率监控精度的 10V 至 80V 热插拔控制器
    电源设备
    TPS23861 具有自主模式的 2 线对、2 类、4 通道 PoE PSE
    硬件开发
    评估板
    LM5056EVM LM5056 高电压系统电源管理 IC 评估模块 TPS23861EVM-612 TPS23861EVM:TPS23861 四路 IEEE 802.3at 以太网供电 PSE 控制器评估模块
    支持软件

    SNVU310 LM25066 Design Calculator

    支持的米6体育平台手机版_好二三四和硬件

    支持的米6体育平台手机版_好二三四和硬件

    米6体育平台手机版_好二三四
    电子保险丝和热插拔控制器
    LM25066 具有 PMBus 的 2.9V 至 17V 热插拔控制器 LM25066A 具有 I2C 和 PMBus 及更高监控精度的 2.9V 至 17V 热插拔控制器 LM25066I 具有 I2C 和 PMBus 的 2.9V 至 17V 热插拔控制器,带有 Intel 节点管理器 LM25066IA 具有 I2C 和 PMBus 及更高监控精度的 2.9V 至 17V 热插拔控制器,带有 Intel 节点
    仿真模型

    LM25066A Unencrypted PSpice Transient Model Package (Rev. A)

    SNVM476A.ZIP (62 KB) - PSpice Model
    计算工具

    SNVR505 LM25066 Design Calculator With FET Recommendation

    支持的米6体育平台手机版_好二三四和硬件

    支持的米6体育平台手机版_好二三四和硬件

    米6体育平台手机版_好二三四
    电子保险丝和热插拔控制器
    LM25066 具有 PMBus 的 2.9V 至 17V 热插拔控制器 LM25066A 具有 I2C 和 PMBus 及更高监控精度的 2.9V 至 17V 热插拔控制器 LM25066I 具有 I2C 和 PMBus 的 2.9V 至 17V 热插拔控制器,带有 Intel 节点管理器 LM25066IA 具有 I2C 和 PMBus 及更高监控精度的 2.9V 至 17V 热插拔控制器,带有 Intel 节点
    计算工具

    TVS-RECOMMENDATION-CALC TVS diode recommendation tool

    This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
    支持的米6体育平台手机版_好二三四和硬件

    支持的米6体育平台手机版_好二三四和硬件

    此设计资源支持这些类别中的大部分米6体育平台手机版_好二三四。

    查看米6体育平台手机版_好二三四详情页,验证是否能提供支持。

    模拟工具

    PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

    PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源米6体育平台手机版_好二三四系列以及精选的模拟行为模型。

    借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短米6体育平台手机版_好二三四上市时间并降低开发成本。

    在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
    参考设计

    PMP10896 — 针对企业级以太网交换机的完备 PMBus 电源系统参考设计

    完整的 PMBus 电力系统,可以为 3 个 ASIC/FPGA 内核、DDR3 内核内存供电,并为高性能以太网交换机提供辅助电压。
    测试报告: PDF
    原理图: PDF
    封装 引脚 CAD 符号、封装和 3D 模型
    WQFN (NHZ) 24 Ultra Librarian

    订购和质量

    包含信息:
    • RoHS
    • REACH
    • 器件标识
    • 引脚镀层/焊球材料
    • MSL 等级/回流焊峰值温度
    • MTBF/时基故障估算
    • 材料成分
    • 鉴定摘要
    • 持续可靠性监测
    包含信息:
    • 制造厂地点
    • 封装厂地点

    推荐米6体育平台手机版_好二三四可能包含与 TI 此米6体育平台手机版_好二三四相关的参数、评估模块或参考设计。

    支持和培训

    视频