MSPM0-SDK — MSPM0 Software Development Kit (SDK)
The MSPM0 SDK provides the ultimate collection of software, tools and documentation to accelerate the development of applications for the MSPM0 MCU platform under a single software package.
两个 SPI 模块,支持高达 16Mbps 的速度
(1)LFSS(低频子系统)的一部分由位于 VBAT 岛中的 VBAT 引脚供电
(2)仅限 MSPM0L222x 器件
(3)VQFN 封装具有可湿性侧面。
MSPM0Lx22x 微控制器 (MCU) 属于高度集成的超低功耗 32 位 MSPM0 MCU 系列,该 MCU 系列基于 Arm Cortex-M0+ 32 位内核平台,工作频率最高可达 32MHz。这些 MCU 为需要采用小型封装(低至 4mm x 4mm)或高引脚数封装(高达 80 引脚)的 128KB 至 256KB 闪存存储器的应用同时提供了成本优化和设计灵活性。这些器件包括 VBAT 备用岛、可选的分段式 LCD 控制器(在 MSPM0L222x 上)、网络安全机制和高性能集成模拟,并在整个工作温度范围内提供出色的低功耗性能。
这些器件提供具有内置纠错码 (ECC) 且高达 256KB 的嵌入式闪存程序存储器,以及具有 ECC 和奇偶校验保护功能且高达 32KB 的 SRAM。闪存存储器分为两个主要存储体,用于支持现场固件更新,并支持在两个主要存储体之间进行地址交换。VBAT 岛中提供了一个由 VBAT 引脚供电的额外 32 字节备份存储器,其内容即使在主电源 (VDD) 丢失时也会保持。
VBAT 岛提供了一个完全独立的辅助电源域(与主电源分离),该电源域通过电池、超级电容器或备选电压电平(1.62V 至 3.6V)等备用电源为低频模块供电。VBAT 岛包括低频时钟系统(LFOSC、LFXT)、实时时钟、篡改检测和时间戳逻辑、一个独立的看门狗计时器和一个 32 字节的备用存储器。多达五个数字 IO 由 VBAT 电源供电。提供了一种充电模式,用于在 VDD 大于 VBAT 时选择通过主 (VBAT) 电源对 VBAT 引脚上的超级电容器进行涓流充电。
超低功耗分段式 LCD 控制器(在 MSPM0L2228 和 MSPM0L2227 器件上)支持使用多达 59 个引脚以各种多路复用器和偏置配置驱动 LCD 玻璃,从而实现低成本显示。
可以使用灵活的网络安全机制来支持安全启动、安全的现场固件更新、IP 保护(仅执行存储器)、密钥存储等。针对多种 AES 对称密码模式以及 TRNG 熵源提供了硬件加速。网络安全架构已通过 Arm® PSA 1 级认证。
提供了一组高性能模拟模块,其中包括一个最多支持 26 个外部通道的 12 位 1.68Msps SAR ADC。提供了一个模拟比较器,以支持模拟信号的低功耗或低延迟监控。片上电压基准(1.4V 或 2.5V)可用于为 ADC 和比较器提供稳定的基准电压。支持内核温度、VDD 电压和 VBAT 电压的环境监测。
TI MSPM0 系列低功耗 MCU 包含具有不同模拟和数字集成度的器件,可让客户找到满足其工程需求的 MCU。MSPM0 MCU 平台将 Arm Cortex-M0+ 平台与超低功耗整体系统架构相结合,使系统设计人员能够在降低能耗的同时提高性能。
MSPM0Lx22x MCU 由广泛的硬件和软件生态系统提供支持,随附参考设计和代码示例,便于您快速开始设计。开发套件包括可供购买的 LaunchPad。TI 还提供免费的 MSP 软件开发套件 (SDK),该套件在 TI Resource Explorer 中作为 Code Composer Studio™ IDE 桌面版和云版组件提供。MSPM0 MCU 还通过 MSP Academy 提供广泛的在线配套资料、培训,并通过 TI E2E™ 支持论坛提供在线支持。
有关完整的模块说明,请参阅 MSPM0 L 系列 32MHz 微控制器技术参考手册。
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | MSPM0L222x-Q1、MSPM0L122x-Q1 汽车类 混合信号微控制器 数据表 | PDF | HTML | 英语版 | PDF | HTML | 2024年 5月 8日 |
* | 用户指南 | MSPM0 L-Series 32-MHz Microcontrollers Technical Reference Manual (Rev. D) | PDF | HTML | 2024年 5月 15日 | ||
系统设计 | 频率计数器:音调检测 | PDF | HTML | 英语版 | PDF | HTML | 2024年 9月 6日 | |
用户指南 | MSPM0 设计流程指南 (Rev. C) | PDF | HTML | 英语版 (Rev.C) | PDF | HTML | 2024年 8月 12日 | |
米6体育平台手机版_好二三四概述 | 采用 MSPM0Lx22x 微控制器实现低功耗显示和安全设计 | PDF | HTML | 英语版 | PDF | HTML | 2024年 5月 30日 | |
应用手册 | 由电容器供电的 MSPM0 的工作时间 | PDF | HTML | 英语版 | PDF | HTML | 2024年 2月 5日 |
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
The MSPM0 SDK provides the ultimate collection of software, tools and documentation to accelerate the development of applications for the MSPM0 MCU platform under a single software package.
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications. Code Composer Studio is available for download across Windows®, Linux® and macOS® desktops. It can also (...)
查看米6体育平台手机版_好二三四详情页,验证是否能提供支持。
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications. Code Composer Studio is available for download across Windows®, Linux® and macOS® desktops. It can also (...)
SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.
SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
封装 | 引脚 | CAD 符号、封装和 3D 模型 |
---|---|---|
LQFP (PT) | 48 | Ultra Librarian |
VQFN (RGE) | 24 | Ultra Librarian |
VQFN (RHB) | 32 | Ultra Librarian |
推荐米6体育平台手机版_好二三四可能包含与 TI 此米6体育平台手机版_好二三四相关的参数、评估模块或参考设计。
MSP-GANG Installer 1.03.08.00
MSP GANG Manifest
The MSP Gang Programmer is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical flash or FRAM devices at the same time. The MSP Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the user to fully customize the process.
The MSP Gang Programmer is provided with an expansion board, called the Gang Splitter, that implements the interconnections between the MSP Gang Programmer and multiple target devices. Eight cables are provided that connect the expansion board to eight target devices (via JTAG or Spy-Bi-Wire connectors). The programming can be done with a PC or as a standalone device. A PC-side Graphical User Interface is also available and is DLL-based.
Features:
MSPM0 SDK for Windows
MSPM0 SDK for Linux
MSPM0 SDK for macOS
MSPM0 SDK Documentation Overview
MSPM0 SDK Manifest
The MSPM0 SDK delivers components that enable engineers to develop applications on Texas Instruments MSPM0 microcontroller devices. The product is comprised of multiple software components and more than 150 examples of how to use these components together. In addition, examples are provided to demonstrate the use of each functional area and each supported device and as a starting point for your own projects.
The MSPM0 SDK includes support for FreeRTOS and a wide variety of middleware and drivers, including:
The MSPM0 MCU portfolio offers a single development environment that delivers flexible hardware, software and tool options for customers developing applications. A one-time investment with the MSPM0 software development kit (SDK) allows you create portable and modular code, opening the door to create unlimited applications.
CCS Theia v1.5 User's Guide
CCS Theia v1.5.0 is an incremental update to CCS Theia v1.4.1. It contains a number of significant new features and many bug fixes. Refer to the "What's New" section.
Notable Bug Fixes
Known Issues
General Information
Compatibility:
Compilers
Device Support
UniFlash is a standalone tool used to program on-chip and external flash memory on TI MCUs and on-board flash memory for Sitara processors. UniFlash has a GUI, command line, and scripting interface. UniFlash is available free of charge.
MSPM0 hands on training academies. 18 in english and 16 translated to chinese.
The SysConfig tool is used configure TI software and hardware. For software configuration, SysConfig is used in conjunction with a TI SDK. For PinMux configuration, the tool may be used standalone.
查看米6体育平台手机版_好二三四详情页,验证是否能提供支持。
The Code Composer Studio™ IDE is a complete integrated suite that enables developers to create and debug applications of all Texas Instruments Embedded Processors (Sitara, DSP, Automotive, Keystone), Microcontrollers (SimpleLink™, C2000 Digital Control, MSP430, TM4C, Hercules), as well as Digital Power (UCD) and Programmable Gain Amplifier (PGA) devices.