Home Power management AC/DC & DC/DC controllers (external FET)
Home
Power management
AC/DC & DC/DC controllers (external FET)

TPS40101

ACTIVE

4.5-V to 18-V, synchronous buck controller with advanced sequencing and output margining

Order now
Data sheet

A newer version of this product is available

open-in-new Compare alternates
This product continues to be available for existing customers. New designs should consider an alternate product.
Similar functionality to the compared device
NEW TPS54KB20 ACTIVE 4-V to 16-V input, 25-A remote sense synchronous step-down converter Higher power density integrated FET converter solution for up to 25A output current

TPS40101

ACTIVE
Data sheet Order now

Product details

Vin (min) (V) 4.5 Vin (max) (V) 18 Iout (max) (A) 20 Operating temperature range (°C) -40 to 85 Control mode Voltage mode Topology Buck Rating Catalog Vout (min) (V) 0.69 Vout (max) (V) 5.5 Features Dynamic Voltage Scaling, Frequency synchronization, Power good, Remote Sense, Synchronous Rectification, Tracking Iq (typ) (µA) 1800 Duty cycle (max) (%) 85 Number of phases 1
Vin (min) (V) 4.5 Vin (max) (V) 18 Iout (max) (A) 20 Operating temperature range (°C) -40 to 85 Control mode Voltage mode Topology Buck Rating Catalog Vout (min) (V) 0.69 Vout (max) (V) 5.5 Features Dynamic Voltage Scaling, Frequency synchronization, Power good, Remote Sense, Synchronous Rectification, Tracking Iq (typ) (µA) 1800 Duty cycle (max) (%) 85 Number of phases 1
VQFN (RGE) 24 16 mm² 4 x 4
  • Operation over 4.5 V to 18 V Input Range
  • 100 kHz to 1 MHz Voltage Mode Control
  • Output Voltage Range From 0.69 V to 5.5 V
  • Simultaneous, Ratiometric and Sequential Startup Sequencing
  • Remote Sensing (Via Separate GND/PGND)
  • 24-Pin QFN Package
  • Thermal Shutdown
  • Programmable Overcurrent Protection
  • Power Good Indicator
  • 1%, 690-mV Reference
  • Output Margining, 3% and 5%
  • Programmable UVLO and Hysteresis
  • Frequency Synchronization
  • APPLICATIONS
    • Servers
    • Networking Equipment
    • Telecommunications Equipment
    • Power Supply Modules
  • Operation over 4.5 V to 18 V Input Range
  • 100 kHz to 1 MHz Voltage Mode Control
  • Output Voltage Range From 0.69 V to 5.5 V
  • Simultaneous, Ratiometric and Sequential Startup Sequencing
  • Remote Sensing (Via Separate GND/PGND)
  • 24-Pin QFN Package
  • Thermal Shutdown
  • Programmable Overcurrent Protection
  • Power Good Indicator
  • 1%, 690-mV Reference
  • Output Margining, 3% and 5%
  • Programmable UVLO and Hysteresis
  • Frequency Synchronization
  • APPLICATIONS
    • Servers
    • Networking Equipment
    • Telecommunications Equipment
    • Power Supply Modules

The TPS40101 is a wide-input synchronous, step-down controller that offers programmable closed loop soft-start, programmable UVLO and hysteresis, programmable current limit with hiccup recovery and can be synchronized to other timebases. The TPS40101 incorporates MOSFET gate drivers for external N-channel MOSFETs. Gate drive logic incorporates adaptive anti-cross conduction circuitry for improved efficiency, reducing diode conduction in the rectifier MOSFET.

The TPS40101 is a wide-input synchronous, step-down controller that offers programmable closed loop soft-start, programmable UVLO and hysteresis, programmable current limit with hiccup recovery and can be synchronized to other timebases. The TPS40101 incorporates MOSFET gate drivers for external N-channel MOSFETs. Gate drive logic incorporates adaptive anti-cross conduction circuitry for improved efficiency, reducing diode conduction in the rectifier MOSFET.
filter Find other AC/DC & DC/DC controllers (external FET)
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet Midrange Input Synchronous Buck Controller With Advanced Sequencing and Output M datasheet 28 Sep 2006
Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Calculation tool

SLUC263 — Type III Compensation Calculation Tool

Supported products & hardware

Supported products & hardware

Products
AC/DC & DC/DC controllers (external FET)
TPS40007 — 2.25V-5.5V, 300 kHz, Synchronous Buck Controller, Source/ Sink, Prebias Operation TPS40009 — 2.25V-5.5V, 600 kHz, Synchronous Buck Controller, Source/ Sink, Prebias Operation TPS40021 — Enhanced Low Input (2.25V-5.5V) up to 1MHz Frequency, Sync. Buck Controller, source/sink TPS40040 — 2.25 to 5.5 V input, 300 kHz, synchronous buck controller with low pin count TPS40041 — 2.25 to 5.5 V input, 600 kHz, synchronous buck controller with low pin count TPS40055 — Wide Input (8V-40V) up to 1MHz Frequency Synchronous Buck Controller, source/sink TPS40057 — Wide Input (8V-40V) up to 1MHz Frequency Synchronous Buck Controller, source/sink with prebias TPS40075 — 4.5-V to 28-V, synchronous buck controller with voltage feed forward TPS40077 — 4.5-V to 28-V, synchronous buck controller with voltage feed forward in HTSSOP package TPS40101 — 4.5-V to 18-V, synchronous buck controller with advanced sequencing and output margining TPS40170 — 4.5 V to 60 V Wide-Input Synchronous PWM Buck Controller TPS40190 — 4.5-V to 15-V, 20-A synchronous buck controller TPS40192 — 4.5-V to 18-V, 20-A, 600-kHz synchronous buck controller with power good TPS40193 — 4.5-V to 18-V, 20-A, 300-kHz synchronous buck controller with power good TPS40195 — 4.5-V to 20-V, 20-A, synchronous buck controller with power good and synchronization TPS40200 — Wide Input Non-Synchronous Buck DC/DC Controller TPS40303 — 3-V to 20-V, 25-A, 300-kHz synchronous buck controller with FSS TPS40304 — 3-V to 20-V, 25-A, 600-kHz synchronous buck controller with FSS TPS40305 — 3-V to 20-V, 25-A, 1.2-MHz synchronous buck controller with FSS TPS40322 — Dual Output or Two-phase Synchronous Buck Controller TPS40400 — 3-V to 20-V, 30-A, synchronous buck controller with PMBus™, including Telemetry TPS40422 — Dual Output or Multiphase Synchronous Buck Controller with PMBus TPS5130 — 4.5-V to 28-V, triple synchronous buck controller with LDO controller
AC/DC & DC/DC converters (integrated FET)
TPS53311 — 2.9V to 6V Input, 3A Synchronous Step-Down Converter with Eco-Mode and Smooth PWM TPS53313 — 4.5-V to 16-V, 6-A synchronous buck converter with optimized light load efficiency TPS53316 — High-Efficiency, 5-A Step-Down Regulator with Integrated Switcher TPS56121 — 4.5-V to 14-V, 15-A synchronous SWIFT™ buck converter TPS56221 — 4.5-V to 14-V, 25-A synchronous SWIFT™ buck converter
Download
Package Pins CAD symbols, footprints & 3D models
VQFN (RGE) 24 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos