74ACT11374

Name: 74ACT11374
Brand: TI
SKU: 74ACT11374
Price: 1.511 USD

アクティブ

3 ステート出力、オクタル・エッジ・トリガ D タイプ・フリップ・フロップ

ご注文はこちら

データシート

document-pdfAcrobat Octal D-Type Edge-Triggered Flip-Flop With 3-State Outputs データシート (Rev. A) (英語)

74ACT11374

アクティブ

データシート

ご注文はこちら

製品詳細

Number of channels

8

Technology family

ACT

Supply voltage (min) (V)

4.5

Supply voltage (max) (V)

5.5

Input type

TTL-Compatible CMOS

Output type

3-State

Clock frequency (max) (MHz)

70

IOL (max) (mA)

24

IOH (max) (mA)

-24

Supply current (max) (µA)

80

Features

Balanced outputs, Positive input clamp diode, Very high speed (tpd 5-10ns)

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Number of channels

8

Technology family

ACT

Supply voltage (min) (V)

4.5

Supply voltage (max) (V)

5.5

Input type

TTL-Compatible CMOS

Output type

3-State

Clock frequency (max) (MHz)

70

IOL (max) (mA)

24

IOH (max) (mA)

-24

Supply current (max) (µA)

80

Features

Balanced outputs, Positive input clamp diode, Very high speed (tpd 5-10ns)

Operating temperature range (°C)

-40 to 85

Rating

Catalog

SOIC (DW)

24

159.65 mm² 15.5 x 10.3

Eight D-Type Flip-Flops in a Single Package
3-State Bus Driving True Outputs
Full Parallel Access for Loading
Inputs Are TTL-Voltage Compatible
Flow-Through Architecture Optimizes PCB Layout
Center-Pin V_CC and GND Configurations Minimize High-Speed Switching Noise
EPIC^TM (Enhanced-Performance Implanted CMOS) 1-m Process
500-mA Typical Latch-Up Immunity at 125°C
Package Options Include Plastic Small-Outline (DW) and Shrink Small-Outline (DB) Packages, and Standard Plastic 300-mil DIPs (NT)

EPIC is a trademark of Texas Instruments Incorporated.

Eight D-Type Flip-Flops in a Single Package
3-State Bus Driving True Outputs
Full Parallel Access for Loading
Inputs Are TTL-Voltage Compatible
Flow-Through Architecture Optimizes PCB Layout
Center-Pin V_CC and GND Configurations Minimize High-Speed Switching Noise
EPIC^TM (Enhanced-Performance Implanted CMOS) 1-m Process
500-mA Typical Latch-Up Immunity at 125°C
Package Options Include Plastic Small-Outline (DW) and Shrink Small-Outline (DB) Packages, and Standard Plastic 300-mil DIPs (NT)

EPIC is a trademark of Texas Instruments Incorporated.

This 8-bit flip-flop features 3-state outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

The eight flip-flops of the 74ACT11374 are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs.

An output-enable () input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance third state provides the capability to drive bus lines in a bus-organized system without need for interface or pullup components.

does not affect the internal operation of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

The 74ACT11374 is characterized for operation from -40°C to 85°C.

This 8-bit flip-flop features 3-state outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

The eight flip-flops of the 74ACT11374 are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs.

An output-enable () input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance third state provides the capability to drive bus lines in a bus-organized system without need for interface or pullup components.

does not affect the internal operation of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

The 74ACT11374 is characterized for operation from -40°C to 85°C.

filter

その他の D タイプ・フリップ・フロップを検索

ダウンロード